Monthly Specification Update

Errata

1. Linux* operating systems are not supported in RSTe mode

Problem Intel

RSTe mode is not supported on Red Hat* Linux and SUSE* Linux.

Implication Users may not be able to install Red Hat* Linux and SUSE* Linux in Intel

RSTe mode on the Intel

C600 Series Chipset based Server Boards.

Status This issue may be fixed in a future driver or BIOS release.

Workaround None.

2. UEFI operating system installation is not supported in ESRT2 mode

Problem UEFI OS installation of Microsoft Windows*, Red Hat* Linux, or SUSE* Linux

may fail on the AHCI or SCU controller when “EFI Optimized Boot” and “Use

Legacy Video for EFI OS” are both enabled.

Implication Users may not be able to install UEFI OS in ESRT2 mode on the Intel

C600

Series Chipset based Server Boards.

Status Will not fix.

Workaround None.

3. RSTe GUI installation may fail if there are no devices attached to any

on-board AHCI ports

Problem When Microsoft Windows 2008* R2 is installed on the SCU ports, the

installation of RSTe drivers and the Graphic User Interface (GUI) in Windows

2008* R2 will fail, if the AHCI controller is enabled while no device is attached

to the AHCI SATA ports.

Implication Users may not be able to install RSTe GUI with mentioned configuration when

the AHCI controller is enabled and no devices are attached to the AHCI SATA

ports.

Status This issue is fixed in BIOS 01.03.0002 and later releases.

Workaround Either plug a SATA device into one of the AHCI SATA ports, or disable the

on-board AHCI controller in the BIOS.