Intel® Server System R2000BB Product Family Technical Product Specification Revision 2.
® Intel Server System R2000BB Product Family TPS Revision History Date April 2012 Revision Number 1.0 Modifications st 1 Production Release • Corrected LCP front Panel port definition • Corrected LCP product code • Added advisory note to AXXVRAIL feature list June 2012 1.
® Intel Server System R2000BB Product Family TPS Disclaimers INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
® Intel Server System R2000BB Product Family TPS Table of Contents 1. Introduction ........................................................................................................................1 1.1 Chapter Outline ......................................................................................................1 1.2 Server Board Use Disclaimer .................................................................................1 1.3 Product Errata ...............................................
® Intel Server System R2000BB Product Family TPS 3.7.13 Power Recovery ...................................................................................................21 3.7.14 Voltage Interruptions ............................................................................................21 3.7.15 Protection Circuits ................................................................................................21 3.7.16 Over-current Protection (OCP) ..................................................
® Intel Server System R2000BB Product Family TPS 7. Storage Controller Options Overview .............................................................................43 7.1 Embedded SATA / SAS Controller support ..........................................................43 7.2 Embedded Software RAID Support ......................................................................44 7.2.1 Intel® Embedded Server RAID Technology 2 (ESRT2) ......................................... 44 7.2.
® Intel Server System R2000BB Product Family TPS List of Figures Figure 1. Chassis Dimensions.....................................................................................................4 Figure 2. System Components Overview ....................................................................................6 Figure 3. 3.5" Hard Drive Bay - 8 Drive Configuration .................................................................6 Figure 4. 3.5" Hard Drive Bay - 12 Drive Configuration (Storage SKU) .
® Intel Server System R2000BB Product Family TPS Figure 39. 24-Port Expander SAS Connector/Drive Identification Block Diagram ...................... 48 Figure 40. Internal 36-Port SAS Expander Card (RES2CV360) ................................................ 49 Figure 41. 36-Port Expander SAS Connector/Drive Identification Block Diagram ...................... 49 Figure 42. Front I/O Panel Features ..........................................................................................51 Figure 43.
® Intel Server System R2000BB Product Family TPS List of Tables Table 1. System Feature Set.......................................................................................................3 Table 2. System Environmental Limits Summary ........................................................................5 Table 3. Power Supply Module Output Power Connector Pin-out ............................................. 15 Table 4. Riser Slot Power Pin-out ("OPT_12V_PWR_#") ..................................
® Intel Server System R2000BB Product Family TPS < This page intentionally left blank. > x Revision 2.
® Intel Server System R2000BB Product Family TPS 1. Introduction This Technical Product Specification (TPS) provides system level information for the Intel® Server System R2000BB product family. It describes the functions and features of the integrated server system which includes the chassis layout, system boards, power sub-system, cooling sub-system, storage sub-system options, and available installable options.
® Intel Server System R2000BB Product Family TPS 2. Product Family Overview This generation of Intel 2U server platforms offers a variety of system options to meet the varied configuration requirements of high-density high-performance computing environments. The Intel® Server System R2000BB product family is comprised of several available 2U rack mount server systems that are all integrated with an Intel® Server Board S2400BB.
® Intel Server System R2000BB Product Family TPS Table 1.
® Intel Server System R2000BB Product Family TPS Power Supply Options Storage Bay Options Supported Rack Mount Kit Accessory Options The server system can have up to two power supply modules installed, providing support for the following power configurations: 1+0, 1+1 Redundant Power, and 2+0 Combined Power. • Three available power supply options: o AC 460W Gold o AC 750W Platinum • • • • • • 8x – 3.5” SATA/SAS Hot Swap Hard Drive Bays + Optical Drive support 12x – 3.
® Intel Server System R2000BB Product Family TPS 2.2 System Level Environmental Limits The following table defines the system level operating and non-operating environmental limits. Table 2. System Environmental Limits Summary Parameter Limits Temperature Operating ASHRAE Class A2 – Continuous Operation. 10º C to 35º C (50º F to 95º F) with the maximum rate of change not to exceed 10°C per hour ASHRAE Class A3 – Includes operation up to 40C for up to 900 hrs per year.
® Intel Server System R2000BB Product Family TPS See Appendix D in this document or the Intel® S2400BB Product Family Power Budget and Thermal Configuration Tool for system configuration requirements and limitations. 2.3 System Features and Options Overview Figure 2. System Components Overview 2.3.1 Hot Swap Hard Drive Bay and Front Panel Options Figure 3. 3.5" Hard Drive Bay - 8 Drive Configuration 6 Revision 2.
® Intel Server System R2000BB Product Family TPS Figure 4. 3.5" Hard Drive Bay - 12 Drive Configuration (Storage SKU) Figure 5. 2.5" Hard Drive Bay - 8 Drive Configuration Figure 6. 2.5" Hard Drive Bay - 16 Drive Configuration Figure 7. 2.5" Hard Drive Bay - 24 Drive Configuration (Storage SKU) Revision 2.
® Intel Server System R2000BB Product Family TPS 2.3.2 Back Panel Features Figure 8. Back Panel Feature Identification 2.3.3 Front Control Panel Options Label A Description System ID Button w/Integrated LED Label F Description System Status LED B NMI Button (recessed, tool required for use) G Power Button w/Integrated LED C NIC-1 Activity LED H Hard Drive Activity LED D NIC-3 Activity LED I NIC-4 Activity LED E System Cold Reset Button J NIC-2 Activity LED Figure 9.
® Intel Server System R2000BB Product Family TPS 2.4 Server Board Features Overview The following illustration provides a general overview of the server board, identifying key feature and component locations ® Figure 10. Intel Server Board S2400BB Revision 2.
® Intel Server System R2000BB Product Family TPS ® Figure 11. Intel Light-Guided Diagnostic LEDs - Server Board 10 Revision 2.
® Intel Server System R2000BB Product Family TPS 2.5 Available Front Bezel Support The optional front bezel is made of molded plastic and uses a snap-on design. When installed, its design allows for maximum airflow to maintain system cooling requirements. The face of the bezel assembly includes snap-in identification badge options and a wave (shown) feature option to allow for customization. (Intel Product Order Code – A2UBEZEL) Figure 12.
® Intel Server System R2000BB Product Family TPS Figure 14. Front Bezel accesssory ID Badge mechanical drawings 2.6 Available Rack and Cabinet Mounting Kit Options Advisory Note – Available rack and cabinet mounting kits are not designed to support shipment of the server system while installed in a rack. If you chose to do so, Intel advises you verify your shipping configuration with appropriate shock and vibe testing, before shipment.
® Intel Server System R2000BB Product Family TPS 3. Power Subsystem This chapter provides a high level overview of the power management features and specification data for the power supply options available for this server product. Specification variations will be identified for each supported power supply.
® Intel Server System R2000BB Product Family TPS Airflow direction 2mm B25 Retention Latch A25 185mm FCI 2x25 card edge connector 10035388-102 74mm B1 A1 11mm 40mm fan 39mm 8.5mm Figure 15. Power Supply Module Mechanical Drawing Figure 16. Power Supply Module Figure 17. AC Power Supply - Connector View 14 Revision 2.
® Intel Server System R2000BB Product Family TPS 3.2 Main Power Inter-Connect Layout Figure 18. Main Power Connector Identification 3.3 Power Connectors 3.3.1 Power Supply Module Card Edge Connector Each power supply module has a single 2x25 card edge output connection that plugs directly into a matching slot connector on the server board. The connector provides both power and communication signals to the server board. The following table defines the connector pin-out. Table 3.
® Intel Server System R2000BB Product Family TPS The server board provides several connectors to provide power to various system options. The following subsections will identify the location; provide the pin-out definition; and provide a brief usage description for each. 3.3.
® Intel Server System R2000BB Product Family TPS 3.3.4 Optical Drive and SSD Power Connector The server board includes one brown 2x3-pin power connector intended to provide power to an optionally installed optical drive and up to two Solid State Devices (SSDs). On the server board this connector is labeled as “ODD/SSD PWR”. The following table provides the pin-out for this connector. Table 6. Peripheral Drive Power Connector Pin-out (“ODD/SSD PWR”) 3.
® Intel Server System R2000BB Product Family TPS 3.6 Optional Chassis Grounding Support The system provides 10-32 threaded grounding studs on the back panel of the chassis, allowing for optional system grounding via a grounding strap. Figure 20. Chassis Grounding Studs 3.7 3.7.1 AC Input Requirement Power Factor The power supply must meet the power factor requirements stated in the Energy Star® Program Requirements for Computer Servers. These requirements are stated below.
® Intel Server System R2000BB Product Family TPS 3.7.3 AC Line Isolation Requirements The power supply shall meet all safety agency requirements for dielectric strength. Transformers’ isolation between primary and secondary windings must comply with the 3000Vac (4242Vdc) dielectric strength criteria. If the working voltage between primary and secondary dictates a higher dielectric strength test voltage the highest test voltage should be used.
® Intel Server System R2000BB Product Family TPS Table 11. AC Line Sag Transient Performance Duration 0 to 1/2 AC cycle > 1 AC cycle Sag 95% >30% AC Line Sag (10sec interval between each sagging) Operating AC Voltage Line Frequency Performance Criteria Nominal AC Voltage ranges 50/60Hz No loss of function or performance Nominal AC Voltage ranges 50/60Hz Loss of function acceptable, self recoverable Table 12. AC Line Surge Transient Performance Duration Continuous 0 to ½ AC cycle 3.7.
® Intel Server System R2000BB Product Family TPS 3.7.13 Power Recovery The power supply shall recover automatically after an AC power failure. AC power failure is defined to be any loss of AC power that exceeds the dropout criteria. 3.7.14 Voltage Interruptions The power supply shall comply with the limits defined in EN55024: 1998/A1: 2001/A2: 2003 using the IEC 61000-4-11: Second Edition: 2004-03 test standard and performance criteria C defined in Annex B of CISPR 24. 3.7.
® Intel Server System R2000BB Product Family TPS oscillate on and off due to temperature recovering condition. The OTP trip level shall have a minimum of 4°C of ambient temperature margin. 3.8 Cold Redundancy Support Power supplies that support cold redundancy can be enabled to go into a low-power state (that is, cold redundant state) in order to provide increased power usage efficiency when system loads are such that both power supplies are not needed.
® Intel Server System R2000BB Product Family TPS The BMC shall schedule a rolling change for which PSU is the Active, Cold Stby1, Cold Stby 2, and Cold Stby 3 power supply. This allows for equal loading across power supply over their life. Events that trigger a re-configuration of the power supplies using the Cold_Redundancy_Config command. o AC power ON o PSON power ON o Power Supply Failure o Power supply inserted into system 3.8.
® Intel Server System R2000BB Product Family TPS 4. Thermal Management The fully integrated system is designed to operate at external ambient temperatures of between 10ºC- 35ºC with limited excursion based operation up to 45ºC, as specified in Table 2. System Environmental Limits Summary.
® Intel Server System R2000BB Product Family TPS Add-in cards with a minimum 200 LFM (1 m/s) air flow requirement can be installed in any available add-in card slot on Riser Card #1 and the bottom add-in card slot on Riser Card #2. Middle and Top add-in card slots on Riser Card #2 cannot support PCI add-in cards with air flow requirements greater than 100 LFM. o Add-in cards with a >200 LFM air flow requirement cannot be supported.
® Intel Server System R2000BB Product Family TPS 4.2.2 Altitude This option sets the proper altitude that the system will be used. Available settings include: [300m or less], [301m-900m], [901m-1500m], [Above 1500m]. Selecting an altitude range that is lower than the actual altitude the system will be operating at, can cause the fan control system to operate less efficiently, leading to higher system thermals and lower system performance.
® Intel Server System R2000BB Product Family TPS Notes: 1. For fan speed control in Intel chassis 2. Temperature margin from throttling threshold 3. Absolute temperature 4. PECI value or margin value 5. On-die sensor 6. On-board sensor 7. Virtual sensor 8. Available only when PSU has PMBus 9. Calculated estimate The following diagram illustrates the fan speed control structure. Figure 21. Fan Control Model 4.
® Intel Server System R2000BB Product Family TPS Figure 23. System Fan Assembly The system fan assembly is designed for ease of use and supports several features. Each fan is hot-swappable. Each fan is designed for tool-less insertion and extraction from the fan assembly. For instructions on installing or removing a fan module, see the Intel® Server System R2000BB Service Guide.
® Intel Server System R2000BB Product Family TPS Table 19. System Fan Connector Pin-out 4.
® Intel Server System R2000BB Product Family TPS Intel® Xeon Phi™ Coprocessor and GPGPU Add-in Card Support 5. Some (not all) system configurations of the Intel® Server System R2000BB product family have thermal and mechanical support for Intel® Xeon Phi™ Coprocessor cards and Non-Intel GPGPU add-in cards. Which card and system configurations can be supported is dependent on power and thermal limits of the system, and power and thermal requirements of the add-in card.
® Intel Server System R2000BB Product Family TPS • Riser cards can support a maximum combined (all PCIe slots) power draw of up to 75W. Add-in cards with power requirements above 75W will require the additional power to be drawn from either of two 2x2 pin “OPT_12V_ PWR” connectors on the server board. Power cables for these connectors are included in the A2UL16RISER accessory kit and can support both 6 and 8 pin 12V AUX power connectors located on the add-in cards. See section 3.3.
® Intel Server System R2000BB Product Family TPS 6. System Storage and Peripheral Drive Bays Overview The Intel® Server System R2000BB product family has support for many storage device options, including: • • • • • • • Hot Swap 2.5” Hard Disk Drives Hot Swap 3.
® Intel Server System R2000BB Product Family TPS Figure 26. 2.5" Hard Drive Bay - 24 Drive Configuration The drive bay can support either SATA or SAS hard disk drives. Mixing of drive types within a common hot swap backplane is not supported. Systems with multiple hot swap backplanes can support different drive type configurations as long as the drives attached to a common backplane are the same and the installed controller attached to the given backplane can support the drive type.
® Intel Server System R2000BB Product Family TPS Table 21. Drive Activity LED States Condition Power on with no drive activity Green Power on with drive activity Power on and drive spun down Power on and drive spinning up 6.1.1 Drive Type SAS SATA SAS SATA SAS SATA SAS SATA Behavior LED stays on LED stays off LED blinks off when processing a command LED blinks on when processing a command LED stays off LED stays off LED blinks LED stays off 2.
® Intel Server System R2000BB Product Family TPS On the backside of each backplane are several connectors. The following illustration identifies each.
® Intel Server System R2000BB Product Family TPS 6.2 3.5” Hard Disk Drive Support The server is available in 3.5” hard disk configurations of 8 and 12 drives as illustrated below. Label A B C D E F Description System Label Pull-out Tab SATA Optical Drive Video Connector USB Ports Front Control Panel 3.5” Hard Drive Bays Figure 27. 3.5" Hard Drive Bay - 8 Drive Configuration Figure 28. 3.5” Hard Drive Bay - 12 Drive Configuration The drive bay can support either SATA or SAS hard disk drives.
® Intel Server System R2000BB Product Family TPS Light pipes integrated into the drive tray assembly direct light emitted from Amber drive status and Green activity LEDs located next to each drive connector on the backplane, to the drive tray faceplate, making them visible from the front of the system.
® Intel Server System R2000BB Product Family TPS On the backside of each backplane are several connectors. The following illustration identifies each. Label A B C Description 4-port mini-SAS connectors Power connectors SMBus connector A – 4-port Mini-SAS Connectors – The backplane includes two or three multi-port mini-SAS cable connectors, each providing SGPIO and I/O signals for four SAS/SATA hard drives on the backplane.
® Intel Server System R2000BB Product Family TPS 6.3 Optical Drive Support Systems configured with eight 3.5” hard drive bays or up to sixteen 2.5” hard drive bays also include support for an optical drive bay ‘A’ as illustrated below. Figure 29. Optical Drive Support A 2x3 pin power connector on the server board labeled “ODD/SSD PWR” is designed to provide power to a SATA SSD or SATA optical drive using the supplied power cable.
® Intel Server System R2000BB Product Family TPS 6.4 Internal – Fixed Mount Solid State Drive (SSD) Support The system can support one internal fixed mount 2.5” Solid State Drive (SSD). The drive is attached via 4attachment screws to the top side of the air duct. Figure 30. 2.5" Internal Fixed Mount Solid State Drive (SSD) Mounting Option A 2x3 pin power connector on the server board labeled “ODD/SSD PWR” is designed to provide power to the SSD.
® Intel Server System R2000BB Product Family TPS 6.5 Low Profile eUSB SSD Support The system provides support for a low profile eUSB SSD storage device. A 2mm 2x5-pin connector labeled “eUSB SSD” near the rear I/O section of the server board is used to plug this small flash storage device into. Bottom View Top View Figure 31. Low Profile eUSB Placement eUSB features include: • • • • 6.6 2 wire small form factor Universal Serial Bus 2.
® Intel Server System R2000BB Product Family TPS 6.7 mSATA SSD Support The system provides support for a mSATA SSD storage device. Figure 33. mSATA Placement The mSATA storage device plugs in to a 52-pin PCIe mini-connector on the server labeled “mSATA SSD”. mSATA SSD features include: • • • 42 Capacities ranging from 40GB to 128GB Small foot print Low power Revision 2.
® Intel Server System R2000BB Product Family TPS 7. Storage Controller Options Overview The server platform supports many different embedded and add-in SATA/SAS controller and SAS Expander options to provide a large number of possible storage configurations. This section will provide an overview of the different options available. 7.
® Intel Server System R2000BB Product Family TPS 7.2 Embedded Software RAID Support The system includes support for two embedded software RAID options: • • Intel® Embedded Server RAID Technology 2 (ESRT2) based on LSI* MegaRAID SW RAID technology Intel® Rapid Storage Technology (RSTe) Using the BIOS Setup Utility, accessed during system POST, options are available to enable/disable SW RAID, and select which embedded software RAID option to use. 7.2.
® Intel Server System R2000BB Product Family TPS 7.3 Intel® Integrated RAID Module Support (Available Option) The system has support for several Intel® Integrated RAID adapters. The RAID adapter can be installed in to any available PCIe slot on either Riser Card #1 or Riser Card #2. Table 23. Supported Intel® Integrated RAID Modules External Name Description Product Code ® 8P SAS-2.1, Full HW RAID, 1GB, PCIe RMS25PB080 ® 4P SAS-2.
® Intel Server System R2000BB Product Family TPS Figure 34. Mounting feature for accessory kit AXXRBBU9 Figure 35.
® Intel Server System R2000BB Product Family TPS Intel® RAID Expander Features: • SAS protocol, described in the Serial Attached SCSI (SAS) Standard, version 2.
® Intel Server System R2000BB Product Family TPS Figure 37. Internal SAS Expander Installation The following diagrams are used to help identify the mini-SAS connectors found on the SAS expander cards. Care should be taken when connecting connectors from the SAS expander to the connectors on the backplane because each connector is pre-programmed at the factory to provide specific drive identification mapping. Improper connections may provide undesirable drive mappings. Figure 38.
® Intel Server System R2000BB Product Family TPS Figure 40. Internal 36-Port SAS Expander Card (RES2CV360) 0-3 4-7 24-27 28-31 32-35 A B G H I 8 7 36-port SAS 6 0 6Gb 5 1 Expander 4 2 3 8-11 12-15 16-19 20-23 C D E F Figure 41. 36-Port Expander SAS Connector/Drive Identification Block Diagram Each connector on the SAS expander card can be used as a “cable in” (SAS Controller to SAS Expander) or “cable out” (SAS Expander to Hot Swap Backplane) type connector.
® Intel Server System R2000BB Product Family TPS 7.4.4.1 Cable Routing using the both embedded SCU ports and a SAS Expander Card (RSTe only) SCU controller limitations prevent both SCU mini-SAS connectors on the server board from being attached to the same expander card. Therefore, in order to use both embedded SCU ports with a SAS expander card, one SCU port is connected directly to backplane and one SCU port is connected to the expander card.
® Intel Server System R2000BB Product Family TPS 8. Front Control Panel and I/O Panel Overview All system configurations will include a Control Panel on the front of the system providing push button system controls and LED indicators for several system features. Systems configured with eight 3.5” hard drive bays or up to sixteen 2.5” hard drive bays will also include an I/O Panel providing additional system I/O features. This section describes the features and functions of both front panel options. 8.
® Intel Server System R2000BB Product Family TPS 8.2 Control Panel Features The system includes a control panel that provides push button system controls and LED indicators for several system features. Depending on the hard drive configuration, the front control panel may come in either of two formats; however, both provide the same functionality. This section will provide a description for each front control panel feature.
® Intel Server System R2000BB Product Family TPS F – System Status LED – The System Status LED is a bi-color (Green/Amber) indicator that shows the current health of the server system. The system provides two locations for this feature; one is located on the Front Control Panel, the other is located on the back edge of the server board, viewable from the back of the system. Both LEDs are tied together and will show the same state.
® Intel Server System R2000BB Product Family TPS Color Amber State Solid on Criticality Critical, nonrecoverable – System is halted Description Fatal alarm – system has failed or shutdown: CPU CATERR signal asserted MSID mismatch detected (CATERR also asserts for this case). CPU 1 is missing CPU Thermal Trip No power good – power fault DIMM failure when there is only 1 DIMM present and hence no good 1 memory present . Runtime memory uncorrectable error in non redundant mode.
® Intel Server System R2000BB Product Family TPS 9. Intel® Local Control Panel The Intel® Local Control Panel option (Intel Product Order Code – A1U2ULCP) utilizes a combination of control buttons and LCD display to provide system accessibility and monitoring. Label A B C D E F Description LCD Display Left Control Button “Enter” Button Right Control Button USB 2.0 Port USB 2.
® Intel Server System R2000BB Product Family TPS 10. PCI Riser Card Support The system includes two riser card slots on the server board. Riser cards for this server are NOT interchangeable between riser slots. This section will provide an overview of each available riser card and describe the server board features and architecture supporting them. 10.1 Architectural Overview of the Server Board Riser Slots The server board includes two riser card slots labeled “RISER_Slot_1” and “RISER_Slot_2”.
® Intel Server System R2000BB Product Family TPS CPU #1 provides Riser Slot #1 with x16 PCIe bus lanes which can be bifurcated to support multi-slot riser cards. The number of PCIe lanes routed to Riser Slot #2 is dependent on the system configuration. In a single processor configuration, CPU #1 will route x8 (default) bus lanes to Riser Slot #2.
® Intel Server System R2000BB Product Family TPS 10.2 Riser Card Support The system has concurrent support for two riser cards. Each riser card is mounted to a bracket assembly and is installed into the system by aligning the edge connector of the riser card with the matching slot connector on the server board, and with hooks on the bracket assembly to slots on the back edge of the chassis.
® Intel Server System R2000BB Product Family TPS 10.3 Riser Card Options – Riser Slot #1 All x16 PCIe bus lanes for Riser Slot #1 on the server board are routed from CPU #1. Riser cards designed for Riser Slot #1 include the following. 10.3.1 10.3.2 Revision 2.
® Intel Server System R2000BB Product Family TPS 10.4 Riser Card Options – Riser Slot #2 The number of PCIe bus lanes routed to Riser Slot #2 is dependent on the system configuration. In a single processor configuration, CPU #1 will route x8 PCIe (default) bus lanes to the bottom x8 PCIe add-in slot.
® Intel Server System R2000BB Product Family TPS 10.4.3 Revision 2.
® Intel Server System R2000BB Product Family TPS 11. Mezzanine Module Support 11.1 IO Module Support In addition to the embedded I/O features of the server board, and those available with the addition of a PCIe add-in card, the server also provides concurrent support of an optionally installed mezzanine I/O module. Note: I/O modules can only be supported in dual processor configurations. The following table lists the Intel® I/O modules available for this server.
® Intel Server System R2000BB Product Family TPS On the server board each Intel® RMM4 component is installed at the following locations. ® Figure 50. Intel RMM4 Dedicated Management NIC Installation RMM4 Lite Connector ® Figure 51. Intel RMM4 Lite Activation Key Installation Table 26.
® Intel Server System R2000BB Product Family TPS Appendix A: Integration and Usage Tips This section provides a list of useful information that is unique to the Intel® Server System R2000BB Product Family and should be kept in mind while configuring your server system. • • • • • • • • 64 Only the Intel® Xeon® processor E5-2400 product family and Intel® Xeon® processor E5-2400 v2 product family are supported in this Intel server system. Previous generation Intel® Xeon® processors are not supported.
® Intel Server System R2000BB Product Family TPS Appendix B: POST Code Diagnostic LED Decoder As an aid to assist in trouble shooting a system hang that occurs during a system’s Power-On Self Test (POST) process, the server board includes a bank of eight POST Code Diagnostic LEDs on the back edge of the server board.
® Intel Server System R2000BB Product Family TPS Table 28. Diagnostic LED POST Code Decoder Checkpoint Diagnostic LED Decoder 1 = LED On, 0 = LED Off Upper Nibble Lower Nibble MSB 8h 4h 2h 1h 8h 4h 2h #7 #6 #5 #4 #3 #2 #1 LSB 1h #0 Description LED # SEC Phase 01h 0 0 0 0 0 0 0 1 First POST code after CPU reset 02h 0 0 0 0 0 0 1 0 Microcode load begin 03h 0 0 0 0 0 0 1 1 CRAM initialization begin 04h 0 0 0 0 0 1 0 0 Pei Cache When Disabled 05h 0 0 0 0 0 1 0 1 SEC Core At Power On Begin.
® Intel Server System R2000BB Product Family TPS Checkpoint Diagnostic LED Decoder 1 = LED On, 0 = LED Off Upper Nibble Lower Nibble MSB 8h 4h 2h 1h 8h 4h 2h #7 #6 #5 #4 #3 #2 #1 1 0 1 0 0 0 1 1 0 1 0 0 1 0 1 0 1 0 0 1 0 1 0 1 0 0 1 1 1 0 1 0 0 1 1 1 0 1 0 1 0 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 1 0 1 0 1 1 0 1 0 1 0 1 1 0 1 0 1 0 1 1 1 1 0 1 0 1 1 1 1 0 1 1 0 0 0 1 0 1 1 0 0 0 1 0 1 1 0 0 1 1 0 1 1 0 0 1 1 0 1 1 0 1 0 1 0 1 1 0 1 0 1 0 1 1 0 1 1 1 0 1 1 0 1 1 0 0 0 0 0 0 0 LED # A3h A4h A5h A6h A7h A8h A9h A
® Intel Server System R2000BB Product Family TPS POST Memory Initialization MRC Diagnostic Codes There are two types of POST Diagnostic Codes displayed by the MRC during memory initialization; Progress Codes and Fatal Error Codes. The MRC Progress Codes are displays to the Diagnostic LEDs that show the execution point in the MRC operational path at each step. Table 29.
® Intel Server System R2000BB Product Family TPS Table 30. MRC Fatal Error Codes Diagnostic LED Decoder 1 = LED On, 0 = LED Off Checkpoint Upper Nibble Lower Nibble Description MSB LED LSB 8h 4h 2h 1h 8h 4h 2h 1h #7 #6 #5 #4 #3 #2 #1 #0 MRC Fatal Error Codes E8h E9h 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 1 1 1 1 0 1 0 1 0 1 1 1 0 1 0 1 1 1 1 1 0 1 1 0 1 1 1 1 0 1 1 1 1 EAh EBh EDh EFh Revision 2.
® Intel Server System R2000BB Product Family TPS Appendix C: POST Code Errors Most error conditions encountered during POST are reported using POST Error Codes. These codes represent specific failures, warnings, or are informational. POST Error Codes may be displayed in the Error Manager display screen, and are always logged to the System Event Log (SEL). Logged events are available to System Management applications, including Remote and Out of Band (OOB) management.
® Intel Server System R2000BB Product Family TPS Error Code 5224 8130 8131 8132 8133 8160 8161 8162 8163 8170 8171 8172 8173 8180 8181 8182 8183 8190 8198 8300 8305 83A0 83A1 84F2 84F3 84F4 84FF 8500 8501 8520 8521 8522 8523 8524 8525 8526 8527 8528 8529 852A 852B 852C 852D 852E 852F 8530 8531 8532 8533 8534 8535 8536 8537 8538 8539 853A 853B 853C 853D 853E Revision 2.
® Intel Server System R2000BB Product Family TPS Error Code 853F (Go to 85C0) 8540 8541 8542 8543 8544 8545 8546 8547 8548 8549 854A 854B 854C 854D 854E 854F 8550 8551 8552 8553 8554 8555 8556 8557 8558 8559 855A 855B 855C 855D 855E 855F (Go to 85D0) 8560 8561 8562 8563 8564 8565 8566 8567 8568 8569 856A 856B 856C 856D 856E 856F 8570 8571 8572 8573 8574 8575 8576 8577 8578 72 Error Message DIMM_K2 failed test/initialization Response Major DIMM_A1 disabled DIMM_A2 disabled DIMM_A3 disabled DIMM_B1 disab
® Intel Server System R2000BB Product Family TPS Error Code 8579 857A 857B 857C 857D 857E 857F (Go to 85E0) 85C0 85C1 85C2 85C3 85C4 85C5 85C6 85C7 85C8 85C9 85CA 85CB 85CC 85CD 85CE 85CF 85D0 85D1 85D2 85D3 85D4 85D5 85D6 85D7 85D8 85D9 85DA 85DB 85DC 85DD 85DE 85DF 85E0 85E1 85E2 85E3 85E4 85E5 85E6 85E7 85E8 85E9 85EA 85EB 85EC 85ED 85EE 85EF 8604 8605 8606 92A3 92A9 Revision 2.
® Intel Server System R2000BB Product Family TPS Error Code A000 A001 A002 A003 A100 A421 A5A0 A5A1 A6A0 Error Message TPM device not detected. TPM device missing or not responding. TPM device failure. TPM device failed self test.
® Intel Server System R2000BB Product Family TPS Appendix D: System Configuration Table for Thermal Compatibility The following list reflects specified notes identified in the “Support Notes” column in the table. Each note reflects support criteria associated with a specific system configuration. Notes that may not be specified in the table may reflect support criteria for a R1000BB Base System SKU described in the appropriate 1U Technical Product Specification. Table Notes: 1.
® Intel Server System R2000BB Product Family TPS Base System SKUs: R2312BBxxxx R2224BBxxxx A2 A2 A3 A4 35° C 35° C 40° C Redundant Fan Configuration ● ● ● ● Fan Redundancy Support ● Classifications Max Ambient Power Supply Intel® Xeon® processor E52400 product family Intel® Xeon® processor E52400 v2 product family Memory Type (See notes 8 and 9) Add-in Cards (See note 2) 76 A2 A2 A3 A4 45° C 25° C 25° C 35° C 35° C 40° C ● ● ● ● ● ● Power Supplies Base System SKUs: R2308
® Intel Server System R2000BB Product Family TPS Base System SKUs: R2312BBxxxx R2224BBxxxx Classifications ASHRAE Max Ambient I/O Modules (See note 3) Intel® Xeon Phi™ or NonIntel GPGPU (See note 7) RAID Battery Backup Internal SSD Revision 2.
® Intel Server System R2000BB Product Family TPS Glossary Word/Acronym ACA Australian Communication Authority ANSI American National Standards Institute BMC Baseboard Management Controller BIOS Basic Input/Output System CMOS Complementary Metal-oxide-semiconductor D2D DC-to-DC EMP Emergency Management Port FP Front Panel FRB Fault Resilient Boot FRU Field Replaceable Unit 2 78 Definition IC Inter-integrated Circuit bus LCD Liquid Crystal Display LPC Low-pin Count LSB Least Si
® Intel Server System R2000BB Product Family TPS Reference Documents See the following documents for additional information: Intel® Server Board S2400BB Technical Product Specification Intel® Server Board S2400BB Product Family Spares/Parts List and Configuration Guide Intel® Server System R2000BB Service Guide Intel® Server System R2000BB Quick Installation Guide Intel® S2400BB Product Family Power Budget and Thermal Configuration Tool BIOS for PCSD Platforms Based on Intel®
