Intel® Server System R1000BB Product Family Technical Product Specification Revision 2.
® Intel Server System R1000BB Product Family TPS Revision History Date April 2012 Revision Number 1.0 Modifications st 1 Production Release • Corrected LCP front Panel port definition June 2012 1.1 • Corrected LCP product code • Added advisory note to AXXVRAIL feature list • Corrected IO Module product code definitions in Table 1 • Front bezel badge option diagrams added to section 2.5 • Rail Kit Caution and Advisory notes added to section 2.
® Intel Server System R1000BB Product Family TPS Disclaimers INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
® Intel Server System R1000BB Product Family TPS Table of Contents 1. Introduction ........................................................................................................................1 1.1 Chapter Outline ......................................................................................................1 1.2 Server Board Use Disclaimer .................................................................................1 1.3 Product Errata ...............................................
® Intel Server System R1000BB Product Family TPS 3.7.13 Power Recovery ...................................................................................................20 3.7.14 Voltage Interruptions ............................................................................................20 3.7.15 Protection Circuits ................................................................................................20 3.7.16 Over-current Protection (OCP) ..................................................
® Intel Server System R1000BB Product Family TPS 6.3 Intel® Integrated RAID Module Support (Available Option) ................................... 40 7. Front Control Panel and I/O Panel Overview ..................................................................41 7.1 I/O Panel Features ...............................................................................................41 7.2 Control Panel Features ........................................................................................42 ® 8.
® Intel Server System R1000BB Product Family TPS List of Figures Figure 1. Chassis Dimensions.....................................................................................................4 Figure 2. System Components Overview ....................................................................................6 Figure 3. 3.5" Hard Drive Bay - 4 Drive Configuration .................................................................6 Figure 4. 2.5" Hard Drive Bay - 8 Drive Configuration ................
® Intel Server System R1000BB Product Family TPS Figure 39. 1U Butterfly Riser Card #2 Assembly - Front Side View ........................................... 51 Figure 40. Intel® RMM4 Lite Activation Key Installation ...........................................................53 Figure 41. Intel® RMM4 Dedicated Management NIC Installation ............................................. 53 Figure 42. POST Diagnostic LEDs .........................................................................................
® Intel Server System R1000BB Product Family TPS List of Tables Table 1. System Feature Set.......................................................................................................3 Table 2. System Environmental Limits Summary ........................................................................5 Table 3. Power Supply Module Output Power Connector Pin-out ............................................. 15 Table 4. Riser Slot Power Pin-out ("OPT_12V_PWR_#") ..................................
® Intel Server System R1000BB Product Family TPS < This page intentionally left blank. > x Revision 2.
® Intel Server System R1000BB Product Family TPS 1. Introduction This Technical Product Specification (TPS) provides system level information for the Intel® Server System R1000BB product family. It describes the functions and features of the integrated server system which includes the chassis layout, system boards, power sub-system, cooling sub-system, storage sub-system options, and available installable options.
® Intel Server System R1000BB Product Family TPS 2. Product Family Overview This generation of Intel 1U server platforms offers a variety of system options to meet the varied configuration requirements of high-density high-performance computing environments. The Intel® Server System R1000BB product family is comprised of several available 1U rack mount server systems that are all integrated with an Intel® Server Board S2400BB.
® Intel Server System R1000BB Product Family TPS Table 1.
® Intel Server System R1000BB Product Family TPS Power Supply Options The server system can have up to two power supply modules installed, providing support for the following power configurations: 1+0, 1+1 Redundant Power, and 2+0 Combined Power Three power supply options: o AC 460W Gold o AC 750W Platinum Storage Bay Options 4x – 3.5” SATA/SAS Hot Swap Hard Drive Bays + Optical Drive support 8x – 2.
® Intel Server System R1000BB Product Family TPS 2.2 System Level Environmental Limits The following table defines the system level operating and non-operating environmental limits. Table 2. System Environmental Limits Summary Parameter Limits Temperature Operating ASHRAE Class A2 – Continuous Operation. 10º C to 35º C (50º F to 95º F) with the maximum rate of change not to exceed 10°C per hour ASHRAE Class A3 – Includes operation up to 40C for up to 900 hrs per year.
® Intel Server System R1000BB Product Family TPS See Appendix D in this document or the Intel® S2400BB Product Family Power Budget and Thermal Configuration Tool for system configuration requirements and limitations. 2.3 System Features and Options Overview Figure 2. System Components Overview 2.3.1 Hot Swap Hard Drive Bay and Front Panel Options Figure 3. 3.5" Hard Drive Bay - 4 Drive Configuration 6 Revision 2.
® Intel Server System R1000BB Product Family TPS Figure 4. 2.5" Hard Drive Bay - 8 Drive Configuration 2.3.2 Back Panel Features Figure 5. Back Panel Feature Identification 2.3.
® Intel Server System R1000BB Product Family TPS 2.4 Server Board Features Overview The following illustration provides a general overview of the server board, identifying key feature and component locations. 8 Revision 2.
® Intel Server System R1000BB Product Family TPS ® Figure 7. Intel Server Board S2400BB ® Figure 8. Intel Light-Guided Diagnostic LEDs - Server Board Revision 2.
® Intel Server System R1000BB Product Family TPS 10 Revision 2.
® Intel Server System R1000BB Product Family TPS 2.5 Available Front Bezel Support The optional front bezel is made of Black molded plastic and uses a snap-on design. When installed, its design allows for maximum airflow to maintain system cooling requirements. The face of the bezel assembly includes optional snap-in identification badge and wave (shown) features to allow for customization Figure 9. Optional Front Bezel (Intel Product Order Code – A1UBEZEL) Figure 10.
® Intel Server System R1000BB Product Family TPS Figure 13. Front Bezel accessory ID Badge mechanical drawings 2.6 Available Rack and Cabinet Mounting Kit Options Advisory Note – Available rack and cabinet mounting kits are not designed to support shipment of the server system while installed in a rack. If you chose to do so, Intel advises you verify your shipping configuration with appropriate shock and vibe testing, before shipment.
® Intel Server System R1000BB Product Family TPS 3. Power Subsystem This chapter will provide a high level overview of the power management features and specification data for the power supply options available for this server product. Specification variations will be identified for each supported power supply.
® Intel Server System R1000BB Product Family TPS Airflow direction 2mm B25 Retention Latch A25 185mm FCI 2x25 card edge connector 10035388-102 74mm B1 A1 40mm fan 11mm 39mm 8.5mm Figure 14. Power Supply Module Mechanical Drawing Figure 15. Power Supply Module Figure 16. AC Power Supply - Connector View 14 Revision 2.
® Intel Server System R1000BB Product Family TPS 3.2 Main Power Inter-Connect Layout Figure 17. Main Power Connector Identification 3.3 3.3.1 Power Connectors Power Supply Module Card Edge Connector Each power supply module has a single 2x25 card edge output connection that plugs directly into a matching slot connector on the server board (PSU#1) and power distribution board (PSU#2). The connector provides both power and communication signals. The following table defines the connector pin-out.
® Intel Server System R1000BB Product Family TPS The server board provides several connectors to provide power to various system options. The following subsections will identify the location; provide the pin-out definition; and provide a brief usage description for each. 3.3.
® Intel Server System R1000BB Product Family TPS 3.4 Power Supply Module Efficiency The following table provides the required minimum efficiency level at various loading conditions. These are provided at three different load levels: 100%, 50% and 20%. Efficiency is tested over an AC input voltage range of 115 VAC to 220 VAC. Table 7. 460 Watt AC Power Supply Efficiency Loading Minimum Efficiency 100% of maximum 88% 50% of maximum 92% 20% of maximum 88% 10% of maximum 80% Table 8.
® Intel Server System R1000BB Product Family TPS 3.7 3.7.1 AC Input Requirement Power Factor The power supply must meet the power factor requirements stated in the Energy Star® Program Requirements for Computer Servers. These requirements are stated below. Output power Power factor 10% load > 0.65 20% load > 0.80 50% load > 0.90 100% load > 0.95 Tested at 230Vac, 50Hz and 60Hz and 115VAC, 60Hz 3.7.
® Intel Server System R1000BB Product Family TPS 3.7.5 AC Line Fuse The power supply shall have one line fused in the single line fuse on the line (Hot) wire of the AC input. The line fusing shall be acceptable for all safety agency requirements. The input fuse shall be a slow blow type. AC inrush current shall not cause the AC line fuse to blow under any conditions. All protection circuits in the power supply shall not cause the AC fuse to blow unless a component in the power supply has failed.
® Intel Server System R1000BB Product Family TPS 3.7.9 Electrostatic Discharge Susceptibility The power supply shall comply with the limits defined in EN 55024: 1998/A1: 2001/A2: 2003 using the IEC 61000-4-2: Edition 1.2: 2001-04 test standard and performance criteria B defined in Annex B of CISPR 24. 3.7.
® Intel Server System R1000BB Product Family TPS 3.7.17 Over-voltage Protection (OVP) The power supply over voltage protection shall be locally sensed. The power supply shall shutdown and latch off after an over voltage condition occurs. This latch shall be cleared by toggling the PSON# signal or by an AC power interruption. The values are measured at the output of the power supply’s connectors.
® Intel Server System R1000BB Product Family TPS Table 17. Example Load Share Threshold for Activating Supplies Enable Threshold for VCR_ON_EN Disable Threshold for VCR_ON_DIS Standard Redundancy NA; Ignore dc/dc_ active# signal; power supply is always ON Cold Redundant Active NA; Ignore dc/dc_ active# signal; power supply is always ON Cold Standby 1 (02h) 3.2V (40% of max) 3.2V x 0.5 x 0.9 = 1.44V Cold Standby 2 (03h) 5.0V (62% of max) 5.0V x 0.67 x 0.9 = 3.01V Cold Standby 3 (04h) 6.
® Intel Server System R1000BB Product Family TPS When AC voltage is too low, a fast AC loss detection circuit inside each installed power supply asserts an SMBALERT# signal to initiate a throttle condition in the system. System throttling reduces the bandwidth to both system memory and CPUs, which in turn reduces the power load during the AC line drop out event. 3.11 Power Supply Status LED There is a single bi-color LED to indicate power supply status.
® Intel Server System R1000BB Product Family TPS 4. Thermal Management The fully integrated system is designed to operate at external ambient temperatures of between 10ºC- 35ºC with limited excursion based operation up to 45ºC, as specified in Table 3. System Environmental Limits Summary.
® Intel Server System R1000BB Product Family TPS 4.2 Thermal Management Overview In order to maintain the necessary airflow within the system, all of the previously listed components and top cover need to be properly installed. For best system performance, the external ambient temperature should remain below 35ºC and all system fans should be operational. The system is designed for fan redundancy when the system is configured with two power supplies.
® Intel Server System R1000BB Product Family TPS The Acoustic mode offers the best acoustic experience and appropriate cooling capability supporting the majority of the add-in cards used. Performance mode is designed to provide sufficient cooling capability covering all kinds of add-in cards on the market. 4.2.4 Fan PWM Offset This option is reserved for manual adjustment to the minimum fan speed curves. The valid range is from [0 to 100] which stands for 0% to 100% PWM adding to the minimum fan speed.
® Intel Server System R1000BB Product Family TPS The following diagram illustrates the fan speed control structure Figure 20. Fan Control Model 4.3 System Fans Five managed dual rotor 40mm x 56mm system fans and an embedded fan for each installed power supply, provide the primary airflow for the system. The system is designed for fan redundancy when configured with two power supply modules.
® Intel Server System R1000BB Product Family TPS Each system fan is mounted inside its own plastic fan housing which include rotational vibration dampening features. The fan assemblies are held in place by fitting them over mounting pins coming up from the chassis base. The system fan assembly is designed for ease of use and supports several features. System fans are NOT hot-swappable. Each fan and fan assembly is designed for tool-less insertion and extraction from the system.
® Intel Server System R1000BB Product Family TPS Table 19.
® Intel Server System R1000BB Product Family TPS 5. System Storage and Peripheral Options The Intel® Server System R1000BB product family has support for many storage device options, including: • • • • • Hot Swap 2.5” Hard Disk Drives Hot Swap 3.5” Hard Disk Drives SATA Optical Drive Low Profile (2mm) eUSB Solid State Device (eUSB SSD) mSATA Solid State Device Support for different storage and peripheral device options will vary depending on the system SKU.
® Intel Server System R1000BB Product Family TPS Table 20. Drive Status LED States Amber Off Solid On Blink No access and no fault Hard Drive Fault has occured RAID rebuild in progress (1 Hz), Identify (2 Hz) Table 21. Drive Activity LED States Condition Power on with no drive activity Green Power on with drive activity Power on and drive spun down Power on and drive spinning up 5.1.
® Intel Server System R1000BB Product Family TPS On the backside of each backplane are several connectors. The following illustration identifies each. Label A B C Description Power connector 4-port Mini-SAS cable connectors SMBus-In cable connector – From Server board A – Power Harness Connector – The backplane includes a 2x2 connector supplying power to the backplane. Power is routed to the backplane via a power cable harness from the server board.
® Intel Server System R1000BB Product Family TPS 5.2 3.5” Hard Disk Drive Support The server is available with support for four 3.5” hard disk drives as illustrated below. Figure 24. 3.5" Hard Drive Bay Configuration The drive bay can support either SATA or SAS hard disk drives. Mixing of drive types within the hard drive bay is not supported. Hard disk drive type is dependent on the type of host bus controller used, SATA only or SAS. Each 3.
® Intel Server System R1000BB Product Family TPS 5.2.1 2.5” Drive Hot-Swap Backplane Overview The backplane mounts to the back of the drive bay assembly. On the front side of each back plane are mounted four hard disk drive interface connectors (A), each providing both power and I/O signals to attached hard disk drives. On the backside of each backplane are several connectors. The following illustration identifies each.
® Intel Server System R1000BB Product Family TPS A – 7-pin SATA I/O Connectors – The backplane has four 7-pin SATA/SAS I/O connectors, one for each hard drive. A single multi-connector cable is routed from the backplane to a four port mini-SAS connector on the server board or other optionally installed SATA/SAS host bus adapter. B –. SMBus Cable Connectors – The backplane includes a 1x5 cable connector used as a management interface to the server board C-.
® Intel Server System R1000BB Product Family TPS 5.4 eUSB SSD Support The system provides support for a low profile eUSB SSD storage device. A 2mm 2x5-pin connector labeled “eUSB SSD” near the rear I/O section of the server board is used to plug this small flash storage device into. Bottom View Top View Figure 26. Low Profile eUSB SSD Support eUSB features include: • • • • 5.5 2 wire small form factor Universal Serial Bus 2.
® Intel Server System R1000BB Product Family TPS 5.6 mSATA SSD Support The system provides support for a mSATA SSD storage device. Figure 28. mSATA Placement The mSATA storage device plugs in to a 52-pin PCIe mini-connector on the server labeled “mSATA SSD”. mSATA SSD features include: • • • Capacities ranging from 40GB to 128GB Small foot print Low power Revision 2.
® Intel Server System R1000BB Product Family TPS 6. Storage Controller Options Overview The server platform supports many different embedded and add-in SATA/SAS controller and SAS Expander options to provide a large number of possible storage configurations. This section will provide an overview of the different options available. 6.
® Intel Server System R1000BB Product Family TPS 6.2 Embedded Software RAID Support The system includes support for two embedded software RAID options: • • Intel® Embedded Server RAID Technology 2 (ESRT2) based on LSI* MegaRAID SW RAID technology Intel® Rapid Storage Technology (RSTe) Using the BIOS Setup Utility, accessed during system POST, options are available to enable/disable SW RAID, and select which embedded software RAID option to use. 6.2.
® Intel Server System R1000BB Product Family TPS 6.3 Intel® Integrated RAID Module Support (Available Option) The system has support for several Intel® Integrated RAID adapters. The RAID card can be installed into any available x8 PCIe add-in slot. If the system is configured with the optional Butterfly riser card, the RAID adapter can be installed in the x8 PCIe add-in slot on the back side of the riser card, as shown in the following illustration.
® Intel Server System R1000BB Product Family TPS Figure 29. AXXBBU09 and AXXRFMBU2 Installation For additional product information, please reference the following Intel document: • Intel Integrated RAID Module RMS25PB080, RMS25PB040, RMS25CB080, and RMS25CB040 Hardware Users Guide – Intel Order Number G37519-001 • Intel® Raid Maintenance Free Backup Unit AXXRMFBU2 User’s Guide 7.
® Intel Server System R1000BB Product Family TPS 7.2 Control Panel Features The system includes a control panel that provides push button system controls and LED indicators for several system features. Depending on the hard drive configuration, the front control panel may come in either of two formats; however, both provide the same functionality. This section will provide a description for each front control panel feature.
® Intel Server System R1000BB Product Family TPS F – System Status LED – The System Status LED is a bi-color (Green/Amber) indicator that shows the current health of the server system. The system provides two locations for this feature; one is located on the Front Control Panel, the other is located on the back edge of the server board, viewable from the back of the system. Both LEDs are tied together and will show the same state.
® Intel Server System R1000BB Product Family TPS Color Amber State Solid on Criticality Critical, nonrecoverable – System is halted Description Fatal alarm – system has failed or shutdown: 1. CPU CATERR signal asserted 2. MSID mismatch detected (CATERR also asserts for this case). 3. CPU 1 is missing 4. CPU Thermal Trip 5. No power good – power fault 6. DIMM failure when there is only 1 DIMM present and hence no good 1 memory present . 7. 8. 9. 10. 11.
® Intel Server System R1000BB Product Family TPS 8. Intel® Local Control Panel The Intel® Local Control Panel option (Intel Product Order Code – A1U2ULCP) utilizes a combination of control buttons and LCD display to provide system accessibility and monitoring. Label A B C D E F Description LCD Display Left Control Button “Enter” Button Right Control Button USB 2.0 Port USB 2.
® Intel Server System R1000BB Product Family TPS 9. PCI Riser Card Support The system includes two riser card slots on the server board. Riser cards for this server are NOT interchangeable between riser slots. This section will provide an overview of each available riser card and describe the server board features and architecture supporting them. 9.1 Architectural Overview of the Server Board Riser Slots The server board includes two riser card slots labeled “RISER_Slot_1” and “RISER_Slot_2”.
® Intel Server System R1000BB Product Family TPS CPU #1 provides Riser Slot #1 with x16 PCIe bus lanes which can be bifurcated to support multi-slot riser cards. The number of PCIe lanes routed to Riser Slot #2 is dependent on the system configuration. In a single processor configuration, CPU #1 will route x8 (default) PCIe bus lanes to Riser Slot #2.
® Intel Server System R1000BB Product Family TPS 9.2 Riser Card Support NOTE: The riser card slots on the server board are designed to support riser cards only. Inserting a PCIe addin card directly into the riser card slot on the server board will result in damage to the server board, the add-in card, or both. PCIe add-in cards should only be installed into a supported riser card assembly. The system has concurrent support for two riser cards.
® Intel Server System R1000BB Product Family TPS Note: Some half-height PCIe add-in cards installed in Riser Card #1, were found to interfere with the Intel® Integrated RAID Module when installed on the backside of the Butterfly riser card option for Riser #2. Properly installed add-in cards should have no contact between them. Intel does NOT recommend operating a server system when contact is observed between add-in cards. Figure 37. 1U Riser Card #1 Assembly Drawing 9.
® Intel Server System R1000BB Product Family TPS 9.4.2 1-Slot PCIe x16 Riser Card (option) Using this riser card, x16 PCIe bus lanes are routed to Riser Slot #2 from CPU #2. This riser card option can only be used in a dual processor configuration. This riser card option has no functionality in a single processor configuration. Slot Description PCIe x16 lanes, x16 slot 9.4.
® Intel Server System R1000BB Product Family TPS On the front side of the riser card is a x16 PCIe slot (x16 lanes, x16 slot). This add-in card slot can support full-height, half-length PCIe add-in cards and can only be used in a dual processor configuration. This add-in card slot has no functionality in a single processor configuration. Figure 39. 1U Butterfly Riser Card #2 Assembly - Front Side View .
® Intel Server System R1000BB Product Family TPS 10. Mezzanine Module Support 10.1 IO Module Support In addition to the embedded I/O features of the server board, and those available with the addition of a PCIe add-in card, the server also provides concurrent support of an optionally installed mezzanine I/O module. Note: I/O modules can only be supported in dual processor configurations. The following table lists the Intel® I/O modules available for this server.
® Intel Server System R1000BB Product Family TPS On the server board each Intel® RMM4 component is installed at the following locations. RMM4 Lite Connector Figure 40. Intel® RMM4 Lite Activation Key Installation Figure 41. Intel® RMM4 Dedicated Management NIC Installation Table 26.
® Intel Server System R1000BB Product Family TPS Appendix A: Integration and Usage Tips This section provides a list of useful information that is unique to the Intel® Server System R1000BB Product Family and should be kept in mind while configuring your server system. • • • • • • • • 54 Only the Intel® Xeon® processor E5-2400 product family and Intel® Xeon® processor E5-2400 v2 product family are supported in this Intel server system. Previous generation Intel® Xeon® processors are not supported.
® Intel Server System R1000BB Product Family TPS Appendix B: POST Code Diagnostic LED Decoder As an aid to assist in trouble shooting a system hang that occurs during a system’s Power-On Self Test (POST) process, the server board includes a bank of eight POST Code Diagnostic LEDs on the back edge of the server board.
® Intel Server System R1000BB Product Family TPS Table 28. Diagnostic LED POST Code Decoder Checkpoint Diagnostic LED Decoder 1 = LED On, 0 = LED Off Upper Nibble Lower Nibble MSB 8h 4h 2h 1h 8h 4h 2h #7 #6 #5 #4 #3 #2 #1 LSB 1h #0 Description LED # SEC Phase 01h 0 0 0 0 0 0 0 1 First POST code after CPU reset 02h 0 0 0 0 0 0 1 0 Microcode load begin 03h 0 0 0 0 0 0 1 1 CRAM initialization begin 04h 0 0 0 0 0 1 0 0 Pei Cache When Disabled 05h 0 0 0 0 0 1 0 1 SEC Core At Power On Begin.
® Intel Server System R1000BB Product Family TPS Checkpoint Diagnostic LED Decoder 1 = LED On, 0 = LED Off Upper Nibble Lower Nibble MSB 8h 4h 2h 1h 8h 4h 2h #7 #6 #5 #4 #3 #2 #1 1 0 1 0 0 0 1 1 0 1 0 0 1 0 1 0 1 0 0 1 0 1 0 1 0 0 1 1 1 0 1 0 0 1 1 1 0 1 0 1 0 0 1 0 1 0 1 0 0 1 0 1 0 1 0 1 1 0 1 0 1 1 0 1 0 1 0 1 1 0 1 0 1 0 1 1 1 1 0 1 0 1 1 1 1 0 1 1 0 0 0 1 0 1 1 0 0 0 1 0 1 1 0 0 1 1 0 1 1 0 0 1 1 0 1 1 0 1 0 1 0 1 1 0 1 0 1 0 1 1 0 1 1 1 0 1 1 0 1 1 0 0 0 0 0 0 0 LED # A3h A4h A5h A6h A7h A8h A9h A
® Intel Server System R1000BB Product Family TPS POST Memory Initialization MRC Diagnostic Codes There are two types of POST Diagnostic Codes displayed by the MRC during memory initialization; Progress Codes and Fatal Error Codes. The MRC Progress Codes are displays to the Diagnostic LEDs that show the execution point in the MRC operational path at each step. Table 29.
® Intel Server System R1000BB Product Family TPS Table 30.
® Intel Server System R1000BB Product Family TPS Appendix C: POST Code Errors Most error conditions encountered during POST are reported using POST Error Codes. These codes represent specific failures, warnings, or are informational. POST Error Codes may be displayed in the Error Manager display screen, and are always logged to the System Event Log (SEL). Logged events are available to System Management applications, including Remote and Out of Band (OOB) management.
® Intel Server System R1000BB Product Family TPS Error Code 8132 8133 8160 8161 8162 8163 8170 8171 8172 8173 8180 8181 8182 8183 8190 8198 8300 8305 83A0 83A1 84F2 84F3 84F4 84FF 8500 8501 8520 8521 8522 8523 8524 8525 8526 8527 8528 8529 852A 852B 852C 852D 852E 852F 8530 8531 8532 8533 8534 8535 8536 8537 8538 8539 853A 853B 853C 853D 853E 853F (Go to 85C0) 8540 8541 Error Message Processor 03 disabled Processor 04 disabled Processor 01 unable to apply microcode update Processor 02 unable to apply micr
® Intel Server System R1000BB Product Family TPS Error Code 8542 8543 8544 8545 8546 8547 8548 8549 854A 854B 854C 854D 854E 854F 8550 8551 8552 8553 8554 8555 8556 8557 8558 8559 855A 855B 855C 855D 855E 855F (Go to 85D0) 8560 8561 8562 8563 8564 8565 8566 8567 8568 8569 856A 856B 856C 856D 856E 856F 8570 8571 8572 8573 8574 8575 8576 8577 8578 8579 857A 857B 857C 857D 62 Error Message DIMM_A3 disabled DIMM_B1 disabled DIMM_B2 disabled DIMM_B3 disabled DIMM_C1 disabled DIMM_C2 disabled DIMM_C3 disabled
® Intel Server System R1000BB Product Family TPS Error Code 857E 857F (Go to 85E0) 85C0 85C1 85C2 85C3 85C4 85C5 85C6 85C7 85C8 85C9 85CA 85CB 85CC 85CD 85CE 85CF 85D0 85D1 85D2 85D3 85D4 85D5 85D6 85D7 85D8 85D9 85DA 85DB 85DC 85DD 85DE 85DF 85E0 85E1 85E2 85E3 85E4 85E5 85E6 85E7 85E8 85E9 85EA 85EB 85EC 85ED 85EE 85EF 8604 8605 8606 92A3 92A9 A000 A001 A002 A003 A100 Error Message DIMM_K1 encountered a Serial Presence Detection (SPD) failure DIMM_K2 encountered a Serial Presence Detection (SPD) failure
® Intel Server System R1000BB Product Family TPS Error Code A421 A5A0 A5A1 A6A0 Error Message PCI component encountered a SERR error PCI Express component encountered a PERR error PCI Express component encountered an SERR error DXE Boot Service driver: Not enough memory available to shadow a Legacy Option ROM Response Fatal Minor Fatal Minor POST Error Beep Codes The following table lists the POST error beep codes.
® Intel Server System R1000BB Product Family TPS Appendix D: System Configuration Table for Thermal Compatibility The following list reflects specified notes identified in the “Support Notes” column in the table. Each note reflects support criteria associated with a specific system configuration. Notes not specified in the table may reflect support criteria for a R2000BB Base System SKU described in the appropriate 2U Technical Product Specification. Notes: 1.
® Intel Server System R1000BB Product Family TPS ASHRAE Cooling Power Supply Intel® Xeon® processor E5-2400 product family Intel® Xeon® processor E5-2400 v2 product family Memory Type Add-in Cards Base System SKUs: R1304BBxxxx Base System SKUs: R1208BBxxxx Classifications A2 A3 A4 A2 A3 A4 Max Ambient 35°C 40°C 45°C 35°C 40°C 45°C Redundant Fan Configuration ● ● ● ● ● ● Fan Fail Support ● Power Supplies ● See Tool ● ● ● EN,60W,6C (E5-2430L) ● ● EN, 95W, 6C (E5-2420, E5
® Intel Server System R1000BB Product Family TPS ASHRAE Base System SKUs: R1304BBxxxx Base System SKUs: R1208BBxxxx Classifications A2 A3 A4 A2 A3 A4 Max Ambient 35°C 40°C 45°C 35°C 40°C 45°C Intel® Xeon Phi™ or non-Intel GPGPU w/Passive cooling: up to 300W Intel® Xeon Phi™ or non-Intel GPGPU w/Passive cooling: up to 245W Internal SSD Note 1 Not supported Not supported Intel® Xeon Phi™ or non-Intel GPGPU w/Passive cooling: up to 225W RAID Battery Backup Configuration Notes Not suppor
® Intel Server System R1000BB Product Family TPS Glossary Word/Acronym ACA Australian Communication Authority ANSI American National Standards Institute BMC Baseboard Management Controller BIOS Basic Input/Output System CMOS Complementary Metal-oxide-semiconductor D2D DC-to-DC EMP Emergency Management Port FP Front Panel FRB Fault Resilient Boot FRU Field Replaceable Unit 2 68 Definition IC Inter-integrated Circuit bus LCD Liquid Crystal Display LPC Low-pin Count LSB Least Si
® Intel Server System R1000BB Product Family TPS Reference Documents See the following documents for additional information: Intel® Server Board S2400BB Technical Product Specification Intel® Server Board S2400BB Product Family Spares/Parts List and Configuration Guide Intel® Server System R1000BB Service Guide Intel® Server System R1000BB Quick Installation Guide Intel® S2400BB Product Family Power Budget and Thermal Configuration Tool Intel® Server Board S2400BB, Intel® Server System R1
