System Service Guide

Hardware Installations and Upgrades
40 Intel
®
Server System R1000JP Family Service Guide
Installing the 3.5" Backplane board
1. Place the backplane board into the clamps on chassis base.
2. Secure the backplane board with three screws.
3. Reconnect all cables to the backplane.
Figure 61. Installing the 3.5" Backplane Board
Installing and Removing the Power Distribution Board
Removing the PDB
1. Remove top cover and power supply units from chassis.
2. Remove power cables and PMBus* cable between PDB and backplane.
3. Release the four screws of PDB board and remove it.