System Service Guide

Hardware Installations and Upgrades
Intel
®
Server System R1000JP Family Service Guide 19
2. Remove the left end of the front bezel from the rack handle (see letter A).
3. Rotate the front bezel anticlockwise to release the latches on the right end from the rack
handle (see letter B).
Figure 21. Removing the Front Bezel
Installing the Front Bezel
Note: Before installing the bezel, you must install the rack handles.
1. Lock the right end of the front bezel to the rack handle (see letter A).
2. Rotate the front bezel clockwise till the left end clicks into place (see letter B).
3. Lock the bezel if needed.
Figure 22. Installing the Front Bezel
Removing and Installing the System Top Cover
Removing the System Top Cover
The server system must be operated with the system cover in place to ensure proper cooling. You will
need to remove the top cover to add or replace components (backplane, main power cables, power
distribution board) inside of the server. Before removing the top cover, power down the server and