Technical Product Specification

IntelP

®P

Server System R1000JP FamilyTPS Appendix A: Integration and Usage Tips

Appendix A: Integration and Usage Tips

Before attempting to integrate and configure your system, you should reference this section,

which provides a list of useful information.

 After the system is integrated with processors, memory, and peripheral devices, the

FRUSDR utility

must be run to load the proper Sensor Data Record data to the

integrated Server Management subsystem. Failure to run this utility may prevent Server

Management from accurately monitoring system health and may affect system

performance. The FRUSDR utility for this server system can either be run from the Intel

Deployment CDROM that came with your system, or can be downloaded from the Intel

website referenced at the bottom of this page.

 To ensure the highest system reliability, make sure the latest system software is loaded

on the server before deploying the system onto a live networking environment. This

includes system BIOS, FRUSDR, BMC firmware, and hot-swap controller firmware. The

system software can be updated using the Intel

Deployment CDROM that came with

your system or can be downloaded from the Intel

website referenced at the bottom of

this page.

 System fans are not hot-swappable.

 Only supported memory validated by Intel

should be used in this server system. A list of

supported memory can be found in the Intel

Server Board S1600JP Tested Memory

List which can be downloaded from the Intel

website referenced at the bottom of this

page.

 This system supports the Intel

Xeon

processor E5-2600 / E5-2600 V2 series. You

cannot use Intel

Xeon

processors not referenced on the supported processor list in

this server system.

 You must use the CPU/memory air duct to maintain system thermals.

 To maintain system thermals, you must populate all hard drive bays with either a hard

drive or drive blank.

 You must remove AC power from the system prior to opening the chassis for service.

You can download the latest system documentation, drivers, and system software from the

Intel

Support website at http://www.intel.com/p/en_US/support/highlights/server/R1000JP.

Revision 1.7

Intel

order number: G71652-008