Technical Product Specification

System Storage and Peripheral Options IntelP

®P

Server System R1000JP Family TPS

5. System Storage and Peripheral Options

The Intel

Server System R1000JP product family has support for many storage device options,

including:

 Hot Swap 2.5” Hard Disk Drives

 Hot Swap 3.5” Hard Disk Drives

 SATA Optical Drive

Support for different storage and peripheral device options will vary depending on the system

SKU. This section will provide an overview of each available option.

5.1 2.5” Hard Disk Drive Support

The server is available with support for eight 2.5” hard disk drives as illustrated below:

Figure 26. 2.5" Hard Drive Bay Drive Configuration

The drive bay can support either SATA or SAS hard disk drives. Mixing of drive types within the

hard drive bay is not supported. Hard disk drive type is dependent on the type of host bus

controller used, SATA only or SAS. Each 2.5” hard disk drive is mounted to a drive carrier,

allowing for hot swap extraction and insertion. Drive carriers have a latching mechanism that is

used to extract and insert drives from the chassis, and lock the tray in place.

Light pipes integrated into the drive tray assembly direct the light emitted from Amber drive

status and Green activity LEDs located next to each drive connector on the backplane, to the

drive tray faceplate, making them visible from the front of the system.

Figure 27. LED of HDD Carrier

Table 35. Drive Status LED States

Amber

Off

No access and no fault

Solid On

Hard Drive Fault has occured

Blink

RAID rebuild in progress (1 Hz), Identify (2 Hz)

Amber Status LED

Green Activity LED

Revision 1.7

Intel

order number: G71652-008