Technical Product Specification

Power Sub-System IntelP
®
P Server System R1000JP Family TPS
A
The apparatus shall continue to operate as intended. No degradation of performance.
B
The apparatus shall continue to operate as intended. No degradation of performance
beyond spec limits.
C
Temporary loss of function is allowed provided the function is self-recoverable or can be
restored by the operation of the controls.
3.1.6.10 Electrostatic Discharge Susceptibility
The power supply shall comply with the limits defined in EN 55024: 1998/A1: 2001/A2: 2003
using the IEC 61000-4-2: Edition 1.2: 2001-04 test standard and performance criteria B defined
in Annex B of CISPR 24.
3.1.6.11 Fast Transient/Burst
The power supply shall comply with the limits defined in EN55024: 1998/A1: 2001/A2: 2003
using the IEC 61000-4-4: Second edition: 2004-07 test standard and performance criteria B
defined in Annex B of CISPR 24.
3.1.6.12 Radiated Immunity
The power supply shall comply with the limits defined in EN55024: 1998/A1: 2001/A2: 2003
using the IEC 61000-4-3: Edition 2.1: 2002-09 test standard and performance criteria A defined
in Annex B of CISPR 24.
3.1.6.13 Surge Immunity
The power supply shall be tested with the system for immunity to AC Unidirectional wave; 2kV
line to ground and 1kV line to line, per EN 55024: 1998/A1: 2001/A2: 2003, EN 61000-4-5:
Edition 1.1:2001-04.
The pass criteria include:
 No unsafe operation is allowed under any condition;
 All power supply output voltage levels to stay within proper spec levels;
 No change in operating state or loss of data during and after the test profile;
 No component damage under any condition.
The power supply shall comply with the limits defined in EN55024: 1998/A1: 2001/A2: 2003
using the IEC 61000-4-5: Edition 1.1:2001-04 test standard and performance criteria B defined
in Annex B of CISPR 24.
3.1.6.14 Power Recovery
The power supply should recover automatically after an AC power failure. AC power failure is
defined to be any loss of AC power that exceeds the dropout criteria.
3.1.6.15 Voltage Interruptions
The power supply shall comply with the limits defined in EN55024: 1998/A1: 2001/A2: 2003
using the IEC 61000-4-11: Second Edition: 2004-03 test standard and performance criteria C
defined in Annex B of CISPR 24.
3.1.7 DC Output Specification
3.1.7.1 Output Power/Currents
The following table defines the output current ratings. Each output has a maximum and
minimum current rating shown in table 7. The power supply shall meet both static and dynamic
voltage regulation requirements for the minimum dynamic load conditions. The power supply
Revision 1.7
Intel order number: G71652-008
20