Technical Product Specification

Intel® Server Board S1600JP TPS Platform Management Functional Overview
4.11
Diagnostics Interrupt (NMI)
The BMC generates an NMI pulse under certain conditions. The BMC-generated NMI pulse
duration is at least 30ms. Once an NMI has been generated by the BMC, the BMC does not
generate another NMI until the system has been reset or powered down.
The following actions cause the BMC to generate an NMI pulse:
a. Receiving a Chassis Control command to pulse the diagnostic interrupt. This command
does not cause an event to be logged in the SEL.
b. Detecting that the front panel diagnostic interrupt button has been pressed.
c. Watchdog timer pre-timeout expiration with NMI/diagnostic interrupt pre-timeout action
enabled.
The following table shows behavior regarding NMI signal generation and event logging by the
BMC.
Table 18. NMI Signal Generation and Event Logging
Causal Event
NMI (IA-32 Only)
Signal Generation Front Panel Diagnostic Interrupt Sensor
Event Logging Support
Chassis Control command (pulse diagnostic
interrupt)
X
–
Front panel diagnostic interrupt button pressed
X
X
Watchdog Timer pre-timeout expiration with
NMI/diagnostic interrupt action
X
–
4.12
BMC Basic and Advanced Management Features
The Intel
®
Server Board S1600JP product includes support for an upgrade module to support
the advanced server management functionality.
Table 19. Basic and Advanced Management Features
Feature
Basic*
Advanced**
IPMI 2.0 Feature Support
X
X
In-circuit BMC Firmware Update
X
X
FRB 2
X
X
Chassis Intrusion Detection
X
X
Fan Redundancy Monitoring
X
X
Hot-Swap Fan Support
X
X
Acoustic Management
X
X
Diagnostic Beep Code Support
X
X
Power State Retention
X
X
ARP/DHCP Support
X
X
48 Revision 1.9