Technical Product Specification

Intel® Server Board S1600JP TPS Product Architecture Overview
 Supports Intel
®
Virtualization Technology for Directed I/O (Intel
®
VT-d)
 Supports Intel
®
Trusted Execution Technology (Intel
®
TXT)
 Low Pin Count (LPC) interface
 Firmware Hub (FWH) interface support
 Serial Peripheral Interface (SPI) support
 Intel
®
Anti-Theft Technology (Intel
®
AT)
 JTAG Boundary Scan support
3.4.1
PCI Express*
The Intel
®
C600 PCH provides up to eight PCI Express* Root Ports, supporting the PCI
Express* Base Specification, Revision 2.0. Each Root Port x1 lane supports up to 5 Gb/s
bandwidth in each direction (10 Gb/s concurrent). PCI Express* Root Ports 1-4 or Ports 5-8 can
independently be configured to support four x1s, two x2s, one x2 and two x1s, or one x4
port widths.
From PCH on Intel
®
Server Board S1600JP, PCIe Port8 x1 GenII is connected to BMC Gen1
Uplink.
Ports 1-4 are connected to Intel
®
I350 GbE NIC. The remaining PCIe GenII interconnect
(Port 5-7, 1 based numbering) are unused.
3.4.2
Universal Serial Bus (USB)
There are fourteen USB 2.0 ports available from Intel
®
C600 PCH. All ports are high-speed, full-
speed, and low-speed capable.
A total of 7 USB 2.0 dedicated ports are used by Intel
®
Server
Board S1600JP. The USB port distribution is as follows:
 Emulex* BMC PILOT III consumes two USB 2.0 ports (one USB1.1 and one USB2.0)
 Two rear USB 2.0 ports
 Two internal USB port for extension of front-panel USB port.
 One Type-A USB port
Note: Intel
®
Server Board S1600JP supports three high power USB ports (1 at rear port, 1 at
internal USB port1 and 1 at internal USB port2) + 4 low power USB ports at the same time.
3.4.3
Serial Attached SCSI (SAS) and Serial ATA (SATA) Controller
The Intel
®
C600-A chipset provides storage support through two integrated controllers: AHCI
and SCU. By default, the server board supports up to six SATA ports: Two single 6Gb/sec
SATA ports and four 3Gb/s SATA ports. The board supports up to four 3Gb/s SATA/SAS ports
from the mini-SAS port.
It supports the Serial ATA Specification, Revision 3.0, and several optional sections of the Serial
ATA II: Extensions to Serial ATA 1.0 Specification, Revision 1.0 (AHCI support is required for
some elements).
Intel
®
Server Board S1600JP implements six SATA/SAS ports. The implementation is
as follows:
Revision 1.9 23