Technical Product Specification

BIOS Setup Interface Intel® Server Board S1600JP TPS
Setup Item
Options
Help Text
Comments
Load User Default
Values
None
Load user default values
to all the set options.
Selection only. Select this line and press the
<Enter> key to load User Default Values for all
BIOS settings. These are user-customized BIOS
default settings for all BIOS parameters,
previously established by doing a “Save User
Defaults” action (see above).
There will be a confirmation popup to verify that
the user really intended to take this action.
5.5
Loading BIOS Defaults
Different mechanisms exist for resetting the system configuration to the default values. When a
request to reset the system configuration is detected, the BIOS loads the default system
configuration values during the next POST.
You can send the request to reset the system to the defaults in the following ways:
 Pressing <F9> from within the BIOS Setup utility
 Moving the clear system configuration jumper
 IPMI command (set System Boot options command)
 Int15 AX=DA209
 Choosing Load User Defaults from the Exit page of the BIOS Setup loads user set
defaults instead of the BIOS factory defaults
The recommended steps to load the BIOS defaults are:
1. Power down the system (Do not remove AC power)
2. Move the BIOS DFLT jumper from pins 1-2 to pins 2-3
3. Move the BIOS DFLT jumper from pins 2-3 to pins 1-2
4. Power up the system
.
148 Revision 1.9