Technical Product Specification

BIOS Setup Interface Intel® Server Board S1600JP TPS
Setup Item
Options
Help Text
Comments
Discard Changes
and Exit
None
Exit the BIOS Setup
utility without saving
changes.
The [Esc] key can also
be used.
Selection only. Select this line and press the
<Enter> key to exit Setup without saving any
changes in BIOS settings. If there have been no
changes made in the settings, the BIOS will
resume executing POST.
If changes have been made in BIOS settings, a
confirmation pop-up will appear. If the “Discard
Changes & Exit” action is positively confirmed,
all pending changes will be discarded and BIOS
will resume executing POST. If the “Discard
Changes & Exit” action is not confirmed, BIOS
will resume executing Setup without discarding
any changes.
The <Esc> key may also be used in Setup to
initiate a “Discard Changes & Exit” action.
Save Changes
None
Save Changes made so
far to any of the setup
options.
Selection only. Select this line and press the
<Enter> key to save any pending changes in
BIOS settings.
Also, the user should be aware that most
changes require a reboot to become active. If
changes have been made and saved, without
exiting Setup, the system should be rebooted
later even if no additional changes are made.
Discard Changes
None
Discard Changes made
so far to any of the setup
options.
Selection only. Select this line and press the
<Enter> key to discard any pending unsaved
changes in BIOS settings. If there have been no
changes made in the settings, the BIOS will
resume executing POST.
If changes have been made in BIOS settings
and not yet saved, a confirmation pop-up will
appear. If the “Discard Changes” action is
positively confirmed, all pending changes will be
discarded and BIOS will resume executing
POST. If the “Discard Changes” action is not
confirmed, BIOS will resume executing Setup
without discarding pending changes.
146 Revision 1.9