Technical Product Specification

Intel® Server Board S1600JP TPS BIOS Setup Interface
Error Manager
Save & Exit
Save Changes and Exit
Discard Changes and Exit
Save Changes
Discard Changes
Load Default Values
Save as User Default Values
Load User Default Values
*Certain brands and names may be claimed as the property of others.
Figure 46. Save & Exit Screen
Table 51. Setup Utility – Exit Screen Fields
Setup Item
Options
Help Text
Comments
Save Changes
and Exit
None
Exit the BIOS Setup
utility after saving
changes. The system
reboots if required.
The [F10] key can also
be used.
Selection only. Select this line and press the
<Enter> key to exit Setup with any changes in
BIOS settings saved. If there have been no
changes made in the settings, the BIOS will
resume executing POST.
If changes have been made in BIOS settings, a
confirmation pop-up will appear. If the “Save
Changes & Exit” action is positively confirmed,
any persistent changes will applied and saved to
the BIOS settings in NVRAM storage, then the
system will reboot if necessary (which is
normally the case). If the “Save Changes & Exit”
action is not confirmed, BIOS will resume
executing Setup.
The <F10> function key may also be used from
anyplace in Setup to initiate a “Save Changes &
Exit” action.
Revision 1.9 145