Technical Product Specification

Intel® Server Board S1600JP TPS BIOS Setup Interface
Setup Item
Options
Help Text
Comments
Set User
Password
Entry Field – 0-14
characters
User password is used if
Power On Password is
enabled and to allow
restricted access to
BIOS Setup. Length is 1-
14 characters. Case
sensitive alphabetic,
numeric, and special
characters !@#$%^&*()-
_+=? are allowed.
Note: Removing the
administrator password
also removes the user
password.
The User password is available only if
the Administrator Password has been
installed. This option protects Setup
settings as well as boot choices. The
User Password only allows limited
access to the Setup options, and no
choice of boot devices.
When Power On Password protection is
enabled, the User password may be
used to allow the BIOS to complete
POST and boot the system.
The password format and entry rules
and popup error and warning message
are the same for the User password as
for the Administrator password (see
above).
Power ON
Password
Enabled
Disabled
Enable Power On
Password support. If
enabled, password entry
is required in order to
boot the system.
When Power On Password security is
enabled, the system will halt soon after
power on and the BIOS will ask for a
password before continuing POST and
booting. Either the Administrator or
User password may be used.
If an Administrator password has not
been set, this option will be grayed out
and unavailable. If this option is
enabled and the Administrator
password is removed, that will also
disable this option.
Front Panel
Lockout
Enabled
Disabled
If enabled, locks the
power button OFF
function and the reset
and NMI Diagnostic
Interrupt buttons on the
system’s front panel. If
[Enabled] is selected,
power off and reset must
be controlled through a
system management
interface, and the NMI
Diagnostic Interrupt is
not available.
None
Revision 1.9 115