Technical Product Specification

Intel® Server Board S1600JP TPS BIOS Setup Interface
IOM1 Port3 MAC Address
<MAC Address display >
IOM1 Port4 MAC Address
<MAC Address display >
IO Module 1 Type
<IO Module Description – InfiniBand* Only>
IOM1 InfiniBand* Option ROM Enabled /
Disabled
IOM1 Port1 GUID
<GUID Display>
IOM1 Port1 MAC Address <MAC Address display >
Figure 28. NIC Configuration Screen
Table 35. Setup Utility – NIC Configuration Screen Fields
Setup Item
Options
Help Text
Comments
Wake on LAN
(PME)
Enabled
Disabled
Enables or disables
PCI PME function for
Wake on LAN
capability from LAN
adapters.
Enables/disables PCI/PCIe PME# signal to generate
Power Management Events (PME) and ACPI Table
entries required for Wake on LAN (WOL). However, note
that this will enable WOL only with an ACPI-capable
Operating System which has the WOL function enabled.
PXE 1GbE
Option ROM
Enabled
Disabled
Enable/Disable
Onboard/IOM NIC PXE
Option ROM Load.
This selection is to enable/disable the 1GbE PXE Option
ROM that is used by all Onboard and IO Module 1 GbE
controllers.
This option is grayed out and not accessible if the iSCSI
Option ROM is enabled. It can co-exist with the 10 GbE
PXE Option ROM, the 10 GbE FCoE Option ROM, or
with an InfiniBand* controller Option ROM.
If the 1GbE PXE Option ROM is disabled, and no other
Option ROM is enabled, the system cannot perform a
Network Boot and cannot respond for Wake-on-LAN.
This 1GbE PXE option does not appear unless there is a
1 GbE NIC installed in the system as an Onboard or IO
Module NIC.
Revision 1.9 97