Technical Product Specification

Product Architecture Overview Intel® Server Board S1600JP TPS
 Serial general-purpose I/O Ports (80 in and 80 out)
 Three UARTs
 Platform Environmental Control Interface (PECI)
 Six general-purpose timers
 Interrupt controller
 Multiple SPI flash interfaces
 NAND/Memory interface
 Sixteen mailbox registers for communication between the BMC and host
 LPC ROM interface
 BMC watchdog timer capability
 SD/MMC card controller with DMA support
 LED support with programmable blink rate controls on GPIOs
 Port 80h snooping capability
 Secondary Service Processor (SSP), which provides the HW capability of offloading time
critical processing tasks from the main ARM core.
Emulex* Pilot III contains an integrated SIO, KVMS subsystem, and graphics controller with the
following features:
3.5.1
Super I/O Controller
The integrated super I/O controller provides support for the following features as implemented
on the server board:
 Keyboard Style/BT interface for BMC support
 Two Fully Functional Serial Ports, compatible with the 16C550
 Serial IRQ Support
 Up to 16 Shared GPIO available for host processor
 Programmable Wake-up Event Support
 Plug and Play Register Set
 Power Supply Control
3.5.1.1
Keyboard and Mouse Support
The server board does not support PS/2 interface keyboards and mice. However, the system
BIOS recognizes USB specification-compliant keyboards and mice.
3.5.1.2
Wake-up Control
The super I/O contains functionality that allows various events to power on and power off
the system.
3.5.2
Graphics Controller and Video Support
The integrated graphics controller provides support for the following features as implemented on
the server board:
 Integrated Graphics Core with 2D Hardware accelerator
32 Revision 1.9