Technical Product Specification

Product Architecture Overview Intel® Server Board S1600JP TPS
3.3.2.3
I/O Module Support
To broaden the standard on-board feature set, the server board supports the option of adding a
single I/O module providing external ports for a variety of networking interfaces. The I/O module
attaches to a high density 80-pin connector of I/O module carrier on the Riser 2.
3.4
Intel
®
C600-A PCH Functional Overview
The following sub-sections will provide an overview of the key features and functions of the
Intel
®
C600-A chipset used on the server board. For more comprehensive chipset specific
information, refer to the Intel
®
C600-A Series chipset documents through:
http://www.intel.com/content/www/us/en/chipsets/server-chipsets/server-workstation-
chipsets.html.
Figure 15. Intel
®
C600-A PCH connection
The Intel
®
C600-A PCH component provides extensive I/O support. Functions and
capabilities include:
 PCI Express* Base Specification, Revision 2.0 support for up to eight ports with transfers
up to 5 GT/s.
 PCI Local Bus Specification, Revision 2.3 support for 33 MHz PCI operations (supports
up to four Req/Gnt pairs).
 ACPI Power Management Logic Support, Revision 4.0a
 Enhanced DMA controller, interrupt controller, and timer functions
 Integrated Serial Attached SCSI host controllers at transfer rate up to 6Gb/s on up to
eight ports.
 Integrated Serial ATA host controllers with independent DMA operation on up to six
ports.
 USB host interface with two EHCI high-speed USB 2.0 Host controllers and 2 rate
matching hubs provide support for support for up to fourteen USB 2.0 ports.
 Integrated 10/100/1000 Gigabit Ethernet MAC with System Defense
 System Management Bus (SMBus*) Specification, Version 2.0 with additional support for
I
2
C* devices.
 Supports Intel
®
High Definition Audio
 Supports Intel
®
Rapid Storage Technology (Intel
®
RST)
22 Revision 1.9