Technical Product Specification

BIOS Setup Interface Intel® Server Board S1600JP TPS
Setup
Item
Options
Help Text
Comments
IP address
Entry Field
0.0.0.0, 0.0.0.0
is default
View/Edit IP address. Press <Enter>
to edit.
This specifies the IPv4 Address for the
Baseboard LAN. There is a separate
IPv4 Address field for the Intel
®
RMM4
LAN configuration.
When IPv4 addressing is used, the initial
value for this field is acquired from the
BMC. The setting of IP Source
determines whether this field is display-
only (when Dynamic) or can be edited
(when Static).
When IPv6 addressing is enabled, this
field is grayed out and inactive.
Subnet
Mask
Entry Field
0.0.0.0, 0.0.0.0
is default
View/Edit subnet address. Press
<Enter> to edit.
This specifies the IPv4 addressing
Subnet Mask for the Baseboard LAN.
There is a separate IPv4 Subnet Mask
field for the Intel
®
RMM4 LAN
configuration.
When IPv4 addressing is used, the initial
value for this field is acquired from the
BMC. The setting of IP Source
determines whether this field is display-
only (when Dynamic) or can be edited
(when Static).
When IPv6 addressing is enabled, this
field is grayed out and inactive.
Gateway
IP
Entry Field
0.0.0.0, 0.0.0.0
is default
View/Edit Gateway IP address. Press
<Enter> to edit.
This specifies the IPv4 addressing
Gateway IP for the Baseboard LAN.
There is a separate IPv4 Gateway IP
field for the Intel
®
RMM4 LAN
configuration.
When IPv4 addressing is used, the initial
value for this field is acquired from the
BMC. The setting of IP Source
determines whether this field is display-
only (when Dynamic) or can be edited
(when Static).
When IPv6 addressing is enabled, this
field is grayed out and inactive.
IPv6
Enabled
Disabled
Option to Enable/Disable IPv6
addressing and any IPv6 network
traffic on these channels.
The initial value for this field is acquired
from the BMC. It may be changed in
order to switch between IPv4 and IPv6
addressing technologies.
When this option is set to Disabled, all
130 Revision 1.9