Technical Product Specification

Intel® Server Board S1600JP TPS BIOS Setup Interface
Setup Item
Options
Help Text
Comments
Device Reset
timeout
10 seconds
20 seconds
30 seconds
40 seconds
USB Mass Storage device Start Unit command
timeout.
Setting to a larger value provides more time for a
mass storage device to be ready, if needed.
If the USB controller
setting is Disabled, this
field is grayed out and
inactive.
Mass Storage
Devices
Auto
Floppy
ForcedFDD
Hard Disk
CD-ROM
[Auto] - USB devices less than 530 MB are
emulated as floppies.
[Forced FDD] - HDD formatted drive is emulated as
an FDD (For example, ZIP drive).
This field is hidden if no
USB Mass Storage
devices are detected.
This setup screen can
show a maximum of eight
USB Mass Storage
devices on the screen. If
more than eight devices
are installed in the
system, the ‘USB
Devices Enabled’
displays the correct count
but only the first eight
devices discovered are
displayed in this list.
If the USB controller
setting is Disabled, this
field is grayed out and
inactive.
5.4.2.16
System Acoustic and Performance Configuration
The System Acoustic and Performance Configuration screen allows the user to configure the
thermal control behavior of the system with respect to what parameters are used in the system’s
Fan Speed Control algorithms.
To access this screen from the Main screen, select Advanced > System Acoustic and
Performance Configuration. To move to another screen, press the <Esc> key to return to the
Advanced screen, then select the desired screen.
Revision 1.9 109