Technical Product Specification

Intel® Server Board S1600JP TPS BIOS Setup Interface
Setup Item
Options
Help Text
Comments
IOM1 Portx
PXE
Enabled
Disabled
Enable/Disable IOM
NIC Port PXE Boot
This will enable or disable PXE Boot capability for Port<x,
x = 1-4> of IO Module 1.
Only ports which actually exist for a particular IOM will
appear in this section. That is, Port1-Port4 will appear for
a quad-port NIC, Port1-Port2 will appear for a dual-port
NIC, and only Port1 will appear for a single-port NIC.
The default state of each Port PXE Boot option is
Enabled, if the corresponding PXE Boot OPROM of the
same speed is Enabled. If a PXE Boot OPROM for 1
GbE or 10 GbE changes from Disabled to Enabled, then
the Port PXE Boot option becomes Enabled for all ports
of that speed.
If the PXE Boot OPROM for1 GbE NICs or 10 GbE NICs
is disabled, PXE Boot will be disabled and grayed out as
unchangeable for all ports on IO Modules of that same
speed.
Conversely, if PXE Boot is disabled for all ports of a
given speed, the corresponding PXE Option ROM will be
disabled but not grayed out since it could be selected.
IOM1 Portx
MAC Address
Mac Address
Display
None
Information only. 12 hex digits of the MAC address of
Port1- Port4 of the IOM1.
IOM1
InfiniBand*
Option ROM
Enabled
Disabled
Enable/Disable
InfiniBand* Controller
Option ROM and
FlexBoot.
This option will control whether the associated InfiniBand*
Controller Option ROM is executed by BIOS during
POST. This will also control whether the InfiniBand*
controller FlexBoot program appears in the list of
bootable devices.
This option only appears for IO Module InfiniBand*
controllers. It does not appear for Ethernet controllers.
IOM1 Port1
GUID
GUID
Display
None
Information only. 16 hex digits of the Port1 GUID of the
InfiniBand* controller for IOM1.
Revision 1.9 101