Technical Product Specification

BIOS Setup Interface Intel® Server Board S1600JP TPS
Setup Item
Options
Help Text
Comments
NIC1 Port x
PXE
Enable
Disable
Enable/Disable NIC 1
Port x PXE Boot
This will enable or disable PXE Boot capability for Port<x,
x = 1-4> of Onboard NIC 1.
This option will not appear for ports on a NIC which is
disabled, or for individual ports when the corresponding
NIC Port is disabled.
Only ports which actually exist for NIC1 will appear in this
section. That is, Port1-Port4 will appear for a quad-port
NIC, Port1-Port2 will appear for a dual-port NIC.
The default state of each Port PXE Boot option is
Enabled, if the corresponding PXE Boot OPROM of the
same speed is Enabled. If a PXE Boot OPROM for 1
GbE or 10 GbE changes from Disabled to Enabled, then
the Port PXE Boot option becomes Enabled for all ports
of that speed.
If the PXE Boot OPROM for1 GbE NICs or 10 GbE NICs
is disabled, PXE Boot will be disabled and grayed out as
unchangeable for all ports on NIC1 of that same speed.
Conversely, if PXE Boot is disabled for all ports of a
given speed, the corresponding PXE Option ROM will be
disabled but not grayed out since it could be selected.
NIC 1 Port x
MAC Address
Mac Address
Display
None
Information only. 12 hex digits of the MAC address of
Port<x, x = 1-4> of the NIC1.
This display will appear only for ports which actually exist
on the corresponding Network Controller. If the Network
Controller or port is disabled, the port MAC Address will
not appear.
IO Module 1
Type
IO Module
Description
None
Information only. This is a display showing which Network
Controllers on IO Modules are installed on the
baseboard. Each of these IO Module NICs will be
followed by a section including a group of options that are
specific to the type of NIC, either as an Ethernet
controller or an InfiniBand* controller.
IO Module Type and following options section will only
appear when an IO Module is installed,
100 Revision 1.9