Technical Product Specification

Intel® Server Board S1600JP TPS BIOS Setup Interface
Setup Item
Options
Help Text
Comments
AHCI Capable
RAID Options
Intel
®
ESRT2
(LSI*)
Intel
®
RSTe
- Intel
®
ESRT2 (Powered By
LSI*): Supports RAID 0/1/10
and optional RAID 5 with Intel
®
RAID C600 Upgrade Keys.
Uses Intel
®
ESRT2 drivers
(based on LSI* MegaSR).
- Intel
®
RSTe: Provides pass-
through drive support. Also
provides host based RAID
0/1/10/5 support. Uses Intel
®
RSTe iaStor drivers.
This option only appears when the SATA
Controller is enabled, and RAID Mode has
been selected as the operational SATA
Mode. This setting selects the RAID stack to
be used for SATA RAID with the onboard
AHCI SATA controller.
If a RAID Volume has not previously been
created that is compatible with the RAID
stack selected, it will be necessary to Save
and Exit and reboot in order to create a
RAID Volume.
SAS/SATA
Capable
Controller
Disabled
Intel
®
ESRT2
(LSI*)
Intel
®
RSTe
- Intel
®
ESRT2: Provides host
based RAID 0/1/10 and
optional RAID 5. Uses
Intel
®
ESRT2 drivers (based on
LSI* MegaSR).
- Intel
®
RSTe: Provides pass-
through drive support. Also
provides host based RAID
0/1/10 support, and RAID 5 (in
SATA mode only). Uses Intel
®
RSTe iaStor drivers.
This option selects the RAID stack to be
used with the SCU. If Disabled is selected,
any drives connected to the SCU will not be
usable.
Intel
®
ESRT2 provides host based RAID
0/1/10 and optional RAID 5. For a RAID 5
configuration, this requires one of the Intel
®
RAID C600 Upgrade Keys uses Intel
®
ESRT2 drivers (based on LSI* MegaSR),
and is also supported by Linux MDRAID.
Intel
®
RSTe provides pass-through drive
support and provides host based RAID
0/1/10 support, and RAID 5 (in SATA mode
only). Uses Intel
®
RSTe drivers in
Windows*, and MDRAID stack in Linux*.
The Intel
®
RSTe RAID stack is required if it
is necessary to provide pass-through
support for non-RAID drives, or if support is
needed for more than eight drives.
Revision 1.9 91