Technical Product Specification Update

Monthly Specification Update
2
Summary Tables of Changes
The following tables provide an overview of known errata and known document changes that
apply to the specified Intel
®
Server Products. The tables use the following notations:
Doc:
Intel
®
intends to update the appropriate documentation in a future revision.
Fix:
Intel
®
intends to fix this erratum in the future.
Fixed:
This erratum has been previously fixed.
No Fix:
There are no plans to fix this erratum.
Shaded:
This erratum is either new or has been modified from the previous specification
update.
Table 1. Errata Summary
No.
Plans
Description of Errata
1.
Fix
Linux* Operating Systems are not supported on SCU ports under RSTe mode.
2.
No Fix
UEFI Operating System installation is not supported on ESRT2 mode.
3.
Fix
RSTe GUI installation may fail if there are no devices attached to any onboard AHCI ports.
4. F
Fixed
Integrated BMC Web Console – Sensor Readings Page – Memory Throttling sensor status will stay
“Critical” once triggered.
5.
Fix
WOL (Wake on LAN) may not function under Red Hat* Linux 6.2 64bit OS.
6.
Fix
System only reports the first occurrence of power redundancy lost events
7.
Fixed
The MAC address of Dual Port Intel
®
X540 10GbE I/O Module(AXX10GBTWLIOM and
AXX10GBTWLHW) in BIOS displays as all zero.
8.
No Fix
SAS 6G module interferes with internal type-A USB port.
9.
No Fix
WOL from S1 state is not supported with Add-on LAN Card.
10.
Fix
Wake up from S3 status is not supported under ESRT2 Raid Mode.
11.
No Fix
Server board may be damaged if insert the PSU 12v DC output (2X4 pin) power connector to board
main power connector 1(2X5 pin) by mistake
12.
Fix
BMC will generate flood event log and send PEF continuously
13.
Fixed
System BIOS may report POST error code 0x146 with the Intel
®
Xeon Phi
™
Coprocessor installed
14.
Fixed
Intel
®
FDR InfiniBand* ConnectX* -3 I/O Module may not comply with FCC and Industry Canada
regulations
15.
Fixed
The Intel
®
Xeon Phi
™
Coprocessor PCI Express* Card Status Sensor may show "Unknown"
16.
Fix
BMC May Report BB +5.0v STBY Sensor Lower Non-Critical Log after AC Cycle
17.
Fixed
BMC May Report PSU Predictive Failure on R1208JP4OC and R1304JP4OC
18.
Fix
When install chipset driver the installer may report “unknown error” on Windows 2003 32bit if AHCI
mode is enabled on SATA port in BIOS
19.
Fix
Reported processor frequency is lower than expected when the BIOS setup option EIST is disabled
and the system is also in idle mode.
20.
Fix
The BMC may become unresponsive intermittently when reconnecting power or performing power
cycling; status LED will be solid amber.
21.
Fixed
VMware ESXi* installation failure when detecting Network Adapters.