Technical Product Specification Update

Monthly Specification Update

Workaround None.

16. BMC May Report BB +5.0v STBY Sensor Lower Non-Critical Log after AC

Cycle

Problem BMC may report a event of BB +5.0v STBY sensor detect low voltage non-

critical after some times AC cycle.

Implication This event only happen when system AC input power start to lost, and server

board +5.0v standby input power voltage start to drop at the same time but the

3.3v AUX power which supports the BMC power still can maintain its voltage

for longer time per the VR design on S1600JP. BMC has 5% rate to receive the

BB +5.0 STBY voltage sensor report and generate the low voltage non-critical

event. This event just reflect the actual voltage drop during AC lost.

Status This issue will be fixed by FRUSDR 1.04

Workaround None

17. BMC May Report PSU Predictive Failure on R1208JP4OC and

R1304JP4OC

Problem BMC may report some events of power supply predictive failure on

R1208JP4OC and R1304JP4OC

Implication Based on current research, Intel believes those predictive failure events are

caused by power supply F/W bug. We didn’t find power supply real HW failure

or functionality abnormal at present.

Status This issue has been fixed by updated PSU FW

Workaround None

18. When install chipset driver the installer may report “unknown error” on

Windows 2003 32bit if AHCI mode is enabled on SATA port in BIOS

Problem When Intel® chipset driver on Windows 2003 32 bit OS on S1600JP, it may

report “Unknown Error” if AHCI mode is enabled on SATA port in BIOS

Implication Chipset driver cannot be installed well

Status This issue may be fix by chipset driver update

Workaround Change BIOS -> Advanced -> Mass Storage Controller Configuration -> SATA

Controller from “AHCI” to any other options.