System Service Guide

Hardware Installations and Upgrades
Intel
®
Server System R1000JP Family Service Guide 29
Figure 37. Installing Memory
Removing Memory
1. Locate the DIMM sockets. Gently spread the retaining clips at each end of the socket. The
DIMM lifts from the socket.
2. Holding the DIMM by the edges, lift it from the socket, and store it in an anti-static package.
Installing and Removing Hot-swap Hard Drive
Caution: If you do not install all the drives, empty drive bays must be occupied by carriers with
plastic drive blank provided to maintain proper system cooling.
Installing a 3.5" Hard Disk Drive into 3.5" Hard Drive Carrier
1. Remove the drive carrier by pressing the green button (letter A) and slide the carrier out (letter
B).
Figure 38. Installing Hard Disk Drive – Removing the drive carrier
2. Remove the four screws securing the HDD interface bracket and install 3.5" HDD with screws
shown in letter C.
.