S2600GZ and S2600GL

Table Of Contents
Intel® Server Board S2600GZ/GL TPS BIOS Setup Utility
Advanced
USB Configuration
Detected USB Devices
<Number of USB devices detected in system>
USB Controller
Enabled/Disabled
Legacy USB Support
Enabled/Disabled/Auto
Port 60/64 Emulation
Enabled/Disabled
Make USB Devices Non-Bootable
Enabled/Disabled
USB Mass Storage Device Configuration
Device Reset Timeout
10 seconds/20 seconds/30 seconds/40 seconds
Mass Storage Devices:
<Mass storage devices one line per device>
Auto/Floppy/Forced FDD/Hard Disk/CD-ROM
Figure 51. USB Configuration Screen
Screen Field Descriptions:
1. Detected USB Devices
Option Values: <Number of USB devices detected in system>
Help Text: <None>
Comments: Information only. Displays the total number of USB devices of all types which
have been detected in POST.
Back to [USB Configuration Screen]
2. USB Controller
Option Values: Enabled
Disabled
Help Text:
[Enabled] - All on-board USB controllers are turned on and accessible by the OS.
[Disabled] - All on-board USB controllers are turned off and inaccessible by the OS.
Comments: When the USB controllers are Disabled, there is no USB IO available for either
POST or the OS. In that case, all following fields on this screen are grayed out and inactive.
Back to [USB Configuration Screen]
Revision 2.4
149