R2000GZ and R2000GL

Intel
®
Server System R2000GZ/GL Product Family TPS
Disclaimer Note: Intel ensures the unpackaged server board and system meet the shock requirement
mentioned above through its own chassis development and system configuration. It is the responsibility of the
system integrator to determine the proper shock level of the board and system if the system integrator chooses
different system configuration or different chassis. Intel Corporation cannot be held responsible, if components
fail or the server board does not operate correctly when used outside any of its published operating or non-
operating limits.
See Appendix D in this document or the Intel
®
S2600GZGL Product Family Power Budget and Thermal
Configuration Tool for system configuration requirements and limitations.
2.3 System Features and Options Overview
Figure 2. System Components Overview
2.3.1 Hot Swap Hard Drive Bay and Front Panel Options
Figure 3. 3.5" Hard Drive Bay - 8 Drive Configuration
8 Revision 2.2