Service Guide

Hardware Installations and Upgrades
38 Intel
®®
Server System R1000BB Service Guide
- If a filler panel is installed, use the 'finger hole' to remove the filler panel (see letter “A”).
-
Figure 61. Removing the filler panel
- If a power supply is installed, push the green latch in the direction shown while pulling out
of the system by the handle.
-
Figure 62. Removing the power supply module
2. Do one of the following:
- Insert the power supply module into the power supply cage and push all the way until it
clicks into place (see letter “B”).
-
Figure 63. Installing the power supply module
- If no power supply is to be installed, install the filler panel into the power supply cage.