Service Guide

Server System Features
Intel
®
Server System R1000BB Service Guide 3
Caution: THE MAXIMUM RECOMMENDED SERVER WEIGHT FOR THE RACK RAILS CAN BE
FOUND at http://www.intel.com/support/motherboards/server/sb/CS-033655.htm
. EXCEEDING THE
MAXIMUM RECOMMENDED WEIGHT OR MISALIGNMENT OF THE SERVER MAY RESULT IN
FAILURE OF THE RACK RAILS HOLDING THE SERVER. Use of a mechanical assist to install and
align server into the rack rails is recommended.
Server Management
 Integrated Baseboard Management Controller, IPMI 2.0 compliant
 Support for Intel® Server Management Software
 Intel
®
Remote Management Module 4 Lite – Accessory option
 Intel
®
Remote Management Module 4 Management NIC – Accessory option
Power Supply
Options

The server system can have up to two power supply modules installed, providing support
for the following power configurations: 1+0, 1+1 Redundant Power, and 2+0 Combined
Power
 Three power supply options:
o AC 460W Gold
o
AC 750W Platinum
Storage Bay
Options
 4x – 3.5” SATA/SAS Hot Swap Hard Drive Bays + Optical Drive support
 8x – 2.5” SATA/SAS Hot Swap Hard Drive Bays + Optical Drive support (capable)
Supported Rack
Mount Kit Accessory
Options
 Tool-less rack mount rail kit – Intel Product Code – AXXPRAIL
 Value rack mount rail kit – Intel Product Code – AXXVRAIL
 Cable Management Arm – Intel Product Code – AXX1U2UCMA (*supported with
AXXPRAIL only)
 2-post fixed mount bracket kit – Intel Product Code – AXX2POSTBRCKT