Intel Server System R2000BB Family

Intel
®
Server System R2000BB Product Family TPS
58 Revision
2.0
10.2 Riser Card Support
The system has concurrent support for two riser cards. Each riser card is mounted to a bracket assembly and
is installed into the system by aligning the edge connector of the riser card with the matching slot connector on
the server board, and with hooks on the bracket assembly to slots on the back edge of the chassis.
Two card guide brackets on the air duct provide support for Full Height / Full Length PCIe add-in cards
installed in the top and middle slots of each installed riser card assembly.
Figure 48. Full Height / Full Length Add-in Card Support
Caution: Riser cards are NOT interchangeable between Riser Slot #1 and Riser Slot #2. The riser card
assembly for Riser #1 will include a mechanical block to prevent accidental insertion into Riser Slot #2.
Do not install a riser card designed for Riser Slot #1 into Riser Slot #2. Doing so will electrically
damage the riser card, riser slot, or both.
Figure 49. Riser Card #1 Assembly Showing Mechanical Block