Intel Server System R2000BB Family

Intel
®
Server System R2000BB Product Family TPS
40 Revision
2.0
6.4 Internal – Fixed Mount Solid State Drive (SSD) Support
The system can support one internal fixed mount 2.5” Solid State Drive (SSD). The drive is attached via 4-
attachment screws to the top side of the air duct.
Figure 30. 2.5" Internal Fixed Mount Solid State Drive (SSD) Mounting Option
A 2x3 pin power connector on the server board labeled “ODD/SSD PWR” is designed to provide power to the
SSD. SATA signals for a single SATA device can be cabled from the white 7-pin AHCI SATA connector on
the server board.
NOTES: Mounting standard mechanical hard disk drives to the air duct is NOT a supported configuration.
Mounting hard disk drives to the air duct may cause data loss, performance degradation, and premature drive
failures.