Monthly Specification Update

Documentation Changes

1. I/O Module Support correction

Document Intel

Server Board S2400BB Technical Product Specification Rev. 1.0

Section I/O Module Support

Issue The I/O module attaches to a high density 80-pin connector on the server

board (J2B1) labeled “IO_Module” and is supported by x8 PCIe Gen3 signals

from the IIO module of the CPU #1 processor.

Change The I/O module attaches to a high density 80-pin connector on the server

board (J2B1) labeled “IO_Module” and is supported by x8 PCIe Gen3 signals

from the IIO module of the CPU #2 processor.

Status This correction will be implemented in a future update of the document.

2. POST Progress Code Table correction

Document Intel

Server Board S2400BB Technical Product Specification Rev. 1.0

Intel

Server System R1000BB Technical Product Specification Rev. 1.1

Intel

Server System R2000BB Technical Product Specification Rev. 1.1

Section POST Code Diagnostic LED Decoder table

Issue POST progress codes for E0h thru E3h were incorrectly displayed in the table.

The upper nibble bits incorrectly showed 1101.

Change The upper nibble bits for POST progress codes E0h thru E3h will be changed

to 1110.

Status Fixed.

3. 2U system Internal fixed mount SSD support change

Document Intel

Server System R2000BB Product Family Technical Product Specification

Rev. 1.1

Section Internal Fixed mount SSD support

Issue Change in documented supported feature. See Errata #11.

Change The document will be changed to reflect support for one SSD instead of two.

Status Fixed.