Intel Server Board S2400BB

Intel® Server Board S2400BB TPS
Revision 2.0
78
8.3.3 Internal Type-A USB Connector
The server board includes one internal Type-A USB connector labeled “USB 2” and is located near the back
edge of the board next to the Riser 1 slot. The following table provides the pin-out for this connector.
Table 36. Internal Type-A USB Connector Pin-out ("USB 2")
Signal Description
Pin#
P5V_USB_INT
1
USB2_P2_F_DN
2
USB2_P2_F_DP
3
GROUND
4
8.3.4 Internal 2mm Low Profile eUSB SSD Connector
The server board includes one 10-pin 2mm low profile connector with an intended usage of supporting low
profile eUSB SSD devices. On the server board this connector is labeled “eUSB SSD”. The following table
provides the pin-out for this connector.
Table 37. Internal eUSB Connector Pin-out ("eUSB SSD")
Signal Description
Pin#
Pin#
Signal Description
P5V
1
2
NOT USED
USB2_P0_DN
3
4
NOT USED
USB2_P0_DP
5
6
NOT USED
GROUND
7
8
NOT USED
NOT USED
9
10
LED_HDD_ACT_N
8.4 Fan Connectors
The server board provides support for six system fans. Each 10-pin connector is monitored and controlled by
on-board platform management. On the server board, each system fan connector is labeled “SYS_FAN #”,
where # = 1 thru 6. The following table provides the pin-out for all six system fan connectors.