Intel Server Board S2400BB

Intel® Server Board S2400BB TPS
Revision 2.0
64
Table 18. Additional Diagnostics on Error.
Category
Data
System Data
First 256 bytes of PCI config data for each PCI
device
PCI error registers
MSR registers
MCH registers
6.10.16 Data Center Management Interface (DCMI)
The DCMI Specification is an emerging standard that is targeted to provide a simplified management interface
for Internet Portal Data Center (IPDC) customers. It is expected to become a requirement for server platforms
which are targeted for IPDCs. DCMI is an IPMI-based standard that builds upon a set of required IPMI
standard commands by adding a set of DCMI-specific IPMI OEM commands. Intel®
S1400/S1600/S2400/S2600 Server Platforms will be implementing the mandatory DCMI features in the BMC
firmware (DCMI 1.1 Errata 1 compliance). Please refer to DCMI 1.1 errata 1 spec for details. Only mandatory
commands will be supported. No support for optional DCMI commands. Optional power management and SEL
roll over feature is not supported. DCMI Asset tag will be independent of baseboard FRU asset Tag. Please
refer table DCMI Group Extension Commands for more details on DCMI commands.
6.10.17 Lightweight Directory Authentication Protocol (LDAP)
The Lightweight Directory Access Protocol (LDAP) is an application protocol supported by the BMC for the
purpose of authentication and authorization. The BMC user connects with an LDAP server for login
authentication. This is only supported for non-IPMI logins including the embedded web UI and SM-CLP. IPMI
users/passwords and sessions are not supported over LDAP.
LDAP can be configured (IP address of LDAP server, port, etc.) via the BMC’s Embedded Web UI. LDAP
authentication and authorization is supported over the any NIC configured for system management. The BMC
uses a standard Open LDAP implementation for Linux.
Only open LDAP is supported by BMC. Windows and Novel LDAP are not supported.