Intel Server Board S2400BB

Intel® Server Board S2400BB TPS
Revision 2.0
1
1. Introduction
This Technical Product Specification (TPS) provides board-specific information detailing the features,
functionality, and high-level architecture of the Intel
®
Server Board S2400BB.
Design-level information related to specific server board components and subsystems can be obtained by
ordering External Product Specifications (EPS) or External Design Specifications (EDS) related to this server
generation. EPS and EDS documents are made available under NDA with Intel and must be ordered through
your local Intel
representative. See the Reference Documents section for a list of available documents.
1.1 Chapter Outline
This document is divided into the following chapters:
 Chapter 1 – Introduction
 Chapter 2 – Product Overview
 Chapter 3 – Product Architecture Overview
 Chapter 4 – System Security
 Chapter 5 – Technology Support
 Chapter 6 – Platform Management Functional Overview
 Chapter 7 – Advanced Management Feature Support (RMM4)
 Chapter 8 – Connector/Header Locations and Pin-outs
 Chapter 9 – Reset and Recovery Jumpers
 Chapter 10 – Intel
®
Light-Guided Diagnostics
 Chapter 11 – Power Supply Design Guidelines
 Chapter 12 - <F2> BIOS Setup Utility
 Appendix A – Integration and Usage Tips
 Appendix B – Integrated BMC Sensor Tables
 Appendix C – Management Engine Generated SEL Event Messages
 Appendix D – POST Code Diagnostic LED Decoder
 Appendix E – POST Code Errors
 Appendix F – Supported Intel
®
Server Systems
1.2 Server Board Use Disclaimer
Intel Corporation server boards support add-in peripherals and contain a number of high-density VLSI and
power delivery components that need adequate airflow to cool. Intel ensures through its own chassis
development and testing that when Intel
®
server building blocks are used together, the fully integrated system
will meet the intended thermal requirements of these components. It is the responsibility of the system
integrator who chooses not to use Intel-developed server building blocks to consult vendor datasheets and
operating parameters to determine the amount of airflow required for their specific application and
environmental conditions. Intel Corporation cannot be held responsible if components fail or the server board
does not operate correctly when used outside any of their published operating or non-operating limits
1.3 Product Errata
The products described in this document may contain design defects or errors known as errata which may
cause the product to deviate from published specifications. Product Errata are documented in the Intel
®
Server
Board S2400BB, Intel
®
Server System R1000BB, Intel
®
Server System R2000BB Monthly Specification Update
which can be downloaded from http://www.intel.com/support
.