Data Sheet

Symbol Parameter Conditions Min Max Unit
V
OH
5.0-V high-level
output voltage
V
CC(TRGT)
= 4.5 V, I
OH
= -10
mA
3.8 — V
3.3-V high-level
output voltage
V
CC(TRGT)
= 3.0 V, I
OH
= -8 mA 2.3 — V
2.5-V high-level
output voltage
V
CC(TRGT)
= 2.375 V, I
OH
= -6
mA
1.8 — V
1.8-V high-level
output voltage
V
CC(TRGT)
= 1.71 V, I
OH
= -4
mA
1.2 — V
V
OL
5.0-V high-level
output voltage
V
CC(TRGT)
= 5.5 V, I
OL
= 10 mA — 0.8
3.3-V high-level
output voltage
V
CC(TRGT)
= 3.6 V, I
OL
= 8 mA — 0.7
2.5-V high-level
output voltage
V
CC(TRGT)
= 2.625 V, I
OL
= 6
mA
— 0.6
1.8-V high-level
output voltage
V
CC(TRGT)
= 1.89 V, I
OL
= 4 mA — 0.5
I
CC(TRGT)
Operating
current (No
Load)
Typical I
CC(TRGT)
= 16 uA — 100 uA
Power Requirements
The USB-Blaster V
CC(TRGT)
pin must be connected to a specific voltage for the device being programmed.
Connect pull-up resistors to the same power supply as the USB-Blaster V
CC(TRGT)
.
Table 2-6: V
CC(TRGT)
Power Requirements
Device Family Voltage Required
FPGAs
Stratix V, Stratix IV, and Stratix III As specified by V
CCPGM
or V
CCPD
.
Stratix II, Stratix II GX, and Stratix
GX
As specified by V
CCSEL
.
Arria 10 As specified by V
CCPGM
or V
CCIO
.
Arria V As specified by V
CCPD
.
Arria II GX As specified by V
CCPD
or V
CCIO
of Bank 8C
Arria GX As specified by V
CCSEL
.
Cyclone V As specified by V
CCPGM
or V
CCPD
.
Cyclone IV As specified by V
CCA
or V
CCIO
.
Cyclone III As specified by V
CCA
or V
CCIO
.
Max 10 As specified by V
CCIO
.
UG-USB81204
2015.08.20
Power Requirements
2-5
Specifications for USB-Blaster Download Cable
Altera Corporation
Send Feedback
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.