Intel 64 and IA-32 Architectures Software Developers Manual Volume 2B, Instruction Set Reference, N-Z

Vol. 2B 4-111
INSTRUCTION SET REFERENCE, N-Z
temp5[31:0] = INT32 ((DEST[95:80] * SRC[95:80]) >>14) + 1;
temp6[31:0] = INT32 ((DEST[111:96] * SRC[111:96]) >>14) + 1;
temp7[31:0] = INT32 ((DEST[127:112] * SRC[127:112) >>14) + 1;
DEST[15:0] = temp0[16:1];
DEST[31:15] = temp1[16:1];
DEST[47:32] = temp2[16:1];
DEST[63:48] = temp3[16:1];
DEST[79:64] = temp4[16:1];
DEST[95:80] = temp5[16:1];
DEST[111:96] = temp6[16:1];
DEST[127:112] = temp7[16:1];
Intel C/C++ Compiler Intrinsic Equivalents
PMULHRSW __m64 _mm_mulhrs_pi16 (__m64 a, __m64 b)
PMULHRSW __m128i _mm_mulhrs_epi16 (__m128i a, __m128i b)
Protected Mode Exceptions
#GP(0) If a memory operand effective address is outside the CS, DS,
ES, FS or GS segments.
(128-bit operations only) If not aligned on 16-byte boundary,
regardless of segment.
#SS(0) If a memory operand effective address is outside the SS
segment limit.
#PF(fault-code) If a page fault occurs.
#UD If CR0.EM = 1.
(128-bit operations only) If CR4.OSFXSR(bit 9) = 0.
If CPUID.SSSE3(ECX bit 9) = 0.
#NM If TS bit in CR0 is set.
#MF (64-bit operations only) If there is a pending x87 FPU exception.
#AC(0) (64-bit operations only) If alignment checking is enabled and
unaligned memory reference is made while the current privilege
level is 3.
Real Mode Exceptions
#GP(0) If any part of the operand lies outside of the effective address
space from 0 to 0FFFFH.
(128-bit operations only) If not aligned on 16-byte boundary,
regardless of segment.
#UD If CR0.EM = 1.
(128-bit operations only) If CR4.OSFXSR(bit 9) = 0.
If CPUID.SSSE3(ECX bit 9) = 0.