Specification Update

October, 2014 Monthly Specification Update
6
8. On some motherboards, SEL log is not cleared from the manufactory
Problem The user may get the board with SEL log not cleared. The SEL content is
“Event Logging Disabled, System Event Log (#0x7) Informational event:
System Event Log reports the log area has been cleared. BMC – LUN#0
(Channel#0)” and “Physical Security (Chassis IntruPhysical Scrty, Physical
Scrty (#0x4) Informational event: Physical Scrty reports LAN Leash has been
regained.”
Implication There is no functional impaction to the user.
Status The issue may be fixed on future board.
Workaround NA.
9. Without rebooting after USB 3.0 driver is installed, using syscfg to
change boot order cannot work in Windows* Operating System
Problem After installing the USB 3.0 driver in Windows* Operating System without
rebooting the system, changing the boot order using syscfg cannot work.
Implication The user needs to reboot the system after installing USB 3.0 driver. Then the
user can change the boot order in Windows* Operating System.
Status The issue may be fixed in future BIOS.
Workaround NA.
10. When installing Redhat* Linux 6 Update 4 with USB device attached, the
USB device cannot work
Problem The USB device cannot work during Rehat* Linux 6 Update 4 installation. The
user needs to disable “USB 3.0” in BIOS setup page.
Implication The user needs to disable the option of “USB 3.0” in setup page, then the USB
can be used to install the Redhat* Linux 6 Update4.
Status Will not fix.
Workaround NA.
11. 500MB memory is reserved in BIOS
Problem In Intel
®
Server Board S1200V3RP family, the BIOS reserves around 500MB
memory.
Implication The user will find 500MB memory loss from operating system.