Service Guide

Hardware Installations and Upgrades
54 Intel
®
Server System R1000RP Service Guide
Replacing the Fixed Power Supply
Caution: Before replacing the power supply, you must first take the server out of service, turn off
all peripheral devices connected to the system, turn off the system by pressing the power button,
and unplug the AC power cord from the system or wall outlet.
The power supply can be replaced if it fails. To replace the power supply, follow these steps:
1. Unsrew the three screws from the rear side as shown (See Letter A), and remove the power
supply (see letter B).
Figure 67. Removing the Fixed Power Supply Module
2. Insert the power supply into the chassis (See Letter A) and secure it with the screws (see letter
B).
Figure 68. Installing the Fixed Power Supply Module