Service Guide

Hardware Installations and Upgrades
52 Intel
®
Server System R1000RP Service Guide
Removing the Intel
®
RMM4 Lite
Pull up the RMM4 Lite module to remove it from the motherboard.
Figure 63. Removing the Intel
®
RMM4 Lite
Removing the Intel
®
RMM4 NIC
1. Disconnect the flex cable from the RMM4 connector on the server board (see letter A).
2. Remove the two screws as shown (see letter B).
3. Disconnect the opposite end of the flex cable from the RMM4 connector on the RMM4 NIC
module (see letter C).
Figure 64. Removing the Intel
®
RMM4 NIC