Service Guide

Server Utilities
122 Intel
®
Server System R1000RP Service Guide
Screen Field Descriptions:
1. IP Source
Option Values: Static
Dynamic
Help Text: Select BMC IP Source. If [Static], IP parameters may be edited. If
[Dynamic], these fields are display-only and IP address is acquired automatically (DHCP).
Comments: This specifies the IP Source for IPv4 addressing for the Baseboard LAN.
There is a separate IP Source field for the Intel
®
RMM4 LAN configuration.
When IPv4 addressing is used, the initial value for this field is acquired from the BMC, and its
setting determines whether the other Baseboard LAN IPv4 addressing fields are display-only
(when Dynamic) or can be edited (when Static).
When IPv6 addressing is enabled, this field is grayed out and inactive.
Back to [BMC LAN Configuration Screen] — [Server Management Screen] — [Screen Map]
2. IP Address
Option Values: [Entry Field 0.0.0.0, 0.0.0.0 is default]
Help Text: View/Edit IP Address. Press <Enter> to edit.
Comments: This specifies the IPv4 Address for the Baseboard LAN. There is a
separate IPv4 Address field for the Intel
®
RMM4 LAN configuration.
When IPv4 addressing is used, the initial value for this field is acquired from the BMC. The
setting of IP Source determines whether this field is display-only (when Dynamic) or can be
edited (when Static).
When IPv6 addressing is enabled, this field is grayed out and inactive.
Back to [BMC LAN Configuration Screen] — [Server Management Screen] — [Screen Map]
3. Subnet Mask
Option Values: [Entry Field 0.0.0.0, 0.0.0.0 is default]
Help Text: View/Edit Subnet Mask. Press <Enter> to edit.
Comments: This specifies the IPv4 addressing Subnet Mask for the Baseboard LAN.
There is a separate IPv4 Subnet Mask field for the Intel
®
RMM4 LAN configuration.
When IPv4 addressing is used, the initial value for this field is acquired from the BMC. The
setting of IP Source determines whether this field is display-only (when Dynamic) or can be
edited (when Static).
When IPv6 addressing is enabled, this field is grayed out and inactive.
Back to [BMC LAN Configuration Screen] — [Server Management Screen] — [Screen Map]
4. Gateway IP
Option Values: [Entry Field 0.0.0.0, 0.0.0.0 is default]
Help Text: View/Edit Gateway IP. Press <Enter> to edit.
Comments: This specifies the IPv4 addressing Gateway IP for the Baseboard LAN.
There is a separate IPv4 Gateway IP field for the Intel
®
RMM4 LAN configuration.
When IPv4 addressing is used, the initial value for this field is acquired from the BMC. The
setting of IP Source determines whether this field is display-only (when Dynamic) or can be
edited (when Static).