Service Guide

Server Utilities
88 Intel
®
Server System R1000RP Service Guide
Help Text: Enable or disable memory mapped I/O of 64-bit PCI devices to 4 GB or
greater address space.
Comments: When enabled, PCI/PCIe Memory Mapped I/O for devices capable of
64-bit addressing is allocated to address space above 4GB, in order to allow larger allocations
and avoid impacting address space below 4G.
Back to [NIC Configuration Screen] — [Advanced Screen] — [Screen Map]
3. Memory Mapped I/O Size
Option Values: Auto
1G/2G/4G/8G/16G/32G/64G/128G/256G/512G/1024G
Help Text: Sets MMIO Size: Auto -> 2G(default).
Comments: When Memory Mapped I/O above 4GB option enabled, this option sets
the preserved MMIO size as PCI/PCIe Memory Mapped I/O for devices capable of 64-bit
addressing. This option is grayed out when Memory Mapped I/O above 4GB option is disabled.
Back to [NIC Configuration Screen] — [Advanced Screen] — [Screen Map]
4. Onboard Video
Option Values: Enabled
Disabled
Help Text: On-board video controller.
Warning: System video is completely disabled if this option is disabled and an add-in video
adapter is not installed and Processor Intergrated graphics.
Comments: When disabled, the system requires an add-in video card or Processor
Intergrate graphics for the video to be seen. When there is no add-in video card or Processor
Intergrated Graphics installed, Onboard Video is set to Enabled and grayed out so it cannot be
changed.
Back to [NIC Configuration Screen] — [Advanced Screen] — [Screen Map]
5. Processor Intergated Graphics
Processor Intergated Graphics: Enabled
Disabled
Help Text: Keep Porcessor Intergrated Graphics enabled based on setup option.
Comments: Processor Intergrated graphics is completely disabled if this option is
disabled.
Note: This configuration page is only visable on RM SKU.
Back to [NIC Configuration Screen] — [Advanced Screen] — [Screen Map]
6. Primary Display
Option Values: PCI Add-on Card
Onboard Video
Processor Intergrated Graphics
Help Text: Select which of Processor Intergrated Graphics/Onboard Video/PCI
Add-on Card Graphics device should be Primary Display or select SG for Switchable GFX
Comments: