Technical Product Specification

Intel
®
Local Control Panel Intel
®
Server System R1000RP Family TPS
Intel order number: G91532-003 Revision 1.3
52
7. The Enter button is used to select a position at the first time and to leave the position at
the second time.
The following state transition diagram explains the above steps pictorially while setting an IP
address using the LCD device. After entering an IP address, the user has to select Set item to
set the entered IP address to the corresponding parameter (IP Address, Subnet Mask, or
Gateway).
Figure 54. State Transition Diagram for Setting IP Address
8.5.3 RMM4 IP
The screen shots and the description in the previous section (BMC IP) are also applicable for
RMM4 IP configuration menu.
8.5.4 Boot Device
If the user selects Boot Device in the Config menu, the following options will be displayed. The
selected item will be set as the next boot option and it will not be a permanent change.
Figure 55. Boot options Configuration Menu
8.5.5 Banner
When the user selects Banner in the Config menu, the following options will be displayed. The
selected item will be set as banner and the same will be displayed from next banner screen
onwards.
^ | CD\DVD | Hard Drive | Network
Boot | EFI Shell
Left/
Right
Enter
Enter
Left
Left
Right
Right
Pos:
x
Pos:
x+1
Pos:
x-1
Increment/
Decrement