Technical Product Specification

Intel

Server System R1000RP Family TPS Intel

Local Control Panel

Revision 1.3 Intel

order number: G91532-003 51

Figure 51. LCP – BMC IP Configuration Menu

Selection of the IP Source in the above menu leads to the following screen. Based on the

user’s selection in the following menu, the firmware sets the BMC IP source as either DHCP or

Static.

Figure 52. LCP – BMC IP Source Configuration Menu

If the user selects DHCP or if the existing IP source is DHCP, the other menu items, that is, IP

Address, Subnet, and Gateway are not configurable. If the user selects Static or if the existing

setting is static for IP source, the user is allowed to change the other menu items and the

screen shot looks as follows.

Figure 53. Screen Shot for Configuring IP Address, Subnet Mask, and Gateway

By default, the cursor will be under the symbol ^ and the IP address is displayed as

000.000.000.000. A right button will take the cursor to the first position (first 0) of the IP address.

When the cursor is under the second menu item, the functionality of Left, Right, and Enter

buttons is different from the previous screens. The second token consists of twelve 0 s’

separated by period (.) character in IP address format. The behaviors of these buttons are as

follows when the cursor is under this item:

1. Left and Right buttons inside the second menu item traverse among the 0 positions

within the same item.

2. If the cursor is under last position inside the second menu item, a Right button will move

the cursor to the next item, that is, Set.

3. If the cursor is under first position inside the second menu item, a Left button moves the

cursor to the previous item, that is, ^.

4. First Enter button at any ‘0’ position makes that position to be selected to increase or

decrease the value at that position. The values allowed are between and including 0 and

5. Any further Left or Right buttons will decrease or increase the value at that position.

6. Second Enter button at that position makes the cursor to be ready for moving left or right.

Any further Left or Right button moves the cursor to previous or next position

respectively.

^ | Gateway: 000.000.000.000 |

Set

^ | Subnet: 000.000.000.000 | Set

^ | IP: 000.000.000.000 | Set

^ | DHCP | Static

^ | IP Source | IP Address | Subnet

| Gateway