Service Guide

68 Intel
®
Server System R1304BTSSFAN/R1304BTLSFAN/R1304BTLSHBN Service Guide
Removing the Rack Handles
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. If it is installed, remove the front bezel.
4. Remove the two screws holding the rack handle in place, and remove the rack
handle from the server system.
5. Repeat Step 4 on the opposite side of the system.
6. (Optional) Install the front bezel, if desired.
7. Plug all peripheral devices and the AC power cable into the server.