Technical Product Specification
Chassis Power Sub-system Intel
®
Server Chassis P4000S Family TPS
Intel order number G22850-006 Revision 1.5
34
Pin
Signal
18 AWG Color
4
COM
Black
5
+12V3
Yellow/Black
2.2.2 Temperature Requirements
The power supply shall operate within all specified limits over the T
op
temperature range.
Table 31. Thermal Requirements
Item
Description
Min
Max
Units
T
op
Operating temperature range.
0
5
0
º
C
T
non-op
Non-operating temperature range.
-
4
0
7
0
º
C
Altitude
Maximum operating altitude.
3
0
0
0
m
e
t
e
r
s
2.2.3 AC Input Requirements
2.2.3.1 Power Factor
The power supply meets the power factor requirements stated in the Energy Star
®
Program
Requirements for Computer Servers. These requirements are stated below.
Table 32. Power Factor Requirements for Computer Servers
Output power
20% load
50% load
100% load
Power factor
0.8
0.9
0.95
Tested at 230Vac, 50Hz and 60Hz and 115VAC, 60Hz.
Tested according to Generalized Internal Power Supply Efficiency Testing Protocol Rev 6.4.3.
This is posted at
http://efficientpowersupplies.epri.com/methods.asp.
2.2.3.2 AC Inlet Connector
The AC input connector is an IEC 320 C-14 power inlet.
This inlet is rated for 10A/250VAC.
2.2.3.3 AC Input Voltage Specification
The power supply operates within all specified limits over the following input voltage range.
Harmonic distortion of up to 10% of the rated line voltage does not cause the power supply to
go out of specified limits. Application of an input voltage below 85VAC does not cause damage
to the power supply, including a blown fuse.