Technical Product Specification

Product Overview Intel
®
Server Chassis P4000S Family TPS
Intel order number G22850-006 Revision 1.5
10
2. Front bezel assembly with the door for hot-swap hard drives configuration.
A. Security Lock
Figure 9. Front Closed Chassis View with Front Bezel for Hot-swap Hard Drives Configuration
Both two pedestal front bezel are constructed of molded plastic and attaches to the front of the
chassis with three clips on the right side and two snaps on the left. The snaps at the left attach
behind the access cover, thereby preventing accidental removal of the bezel. The bezel can
only be removed by first removing the server access cover. This provides additional security to
the hard drive and peripheral bay area.
For the front bezel assembly for fixed hard drives configuration, removing the bezel, there is an
EMI shield covering the fixed hard drives bay area.
For the front bezel assembly for hot-swap hard drives configuration, the bezel includes a key-
locking door that covers the drive cage area and allows access to hot swap drives when a hot
swap drive cage is installed.
The peripheral bays are covered with plastic snap-in cosmetic pieces that must be removed to
add peripherals to the system. Front panel buttons and lights are located above the peripheral
bays.