Technical Product Specification

ManualsBrandsIntel ManualsOtherIntel Server System P4304BTLSFCNR

Intel

Server Chassis P4000S Family

Intel order number G22850-006

Revision 1.5

November, 2012

Enterprise Platforms and Services Marketing

Summary of content (114 pages)

PAGE 1
Intel® Server Chassis P4000S Family Technical Product Specification Intel order number G22850-006 Revision 1.
PAGE 2
® Revision History Intel Server Chassis P4000S Family Revision History Date July, 2010 Revision Number 0.5 Modifications Initial release. December, 2010 1.0 Updated the document. March, 2011 1.1 Added P4304XXSHCN related features. May, 2011 1.2 Added acoustic data for P4304XXSFCN and P4304XXSHCN in section 9.3. June, 2011 1.3 Updated figure in section 5.1.2 – Board Layout. March, 2012 1.4 Added P4304XXSFEN, P4304XXSFDR, P4304XXSHEN, and P4304XXSHDR related features. November, 2012 1.
PAGE 3
® Intel Server Chassis P4000S Family TPS Table of Contents Table of Contents 1. Product Overview ............................................................................................................... 1 1.1 Intel® Server Chassis P4000S Family Design Features .......................................... 1 1.2 Intel® Server Chassis P4304XXSFCN Views .......................................................... 3 1.3 Intel® Server Chassis P4304XXSHCN Views ................................................
PAGE 4
Table of Contents ® Intel Server Chassis P4000S Family TPS 2.3.4 DC Output Specification ....................................................................................... 49 2.3.5 Protection Circuits ................................................................................................ 53 2.3.6 Control and Indicator Functions ............................................................................ 54 2.3.7 Thermal CLST ..................................................................
PAGE 5
® Intel Server Chassis P4000S Family TPS Table of Contents 6.1.2 Intrusion Switch cable .......................................................................................... 85 6.1.3 USB Cable ........................................................................................................... 86 6.1.4 SATA Power Adapter Cable ................................................................................. 86 6.1.5 SATA cable for HDDs/ODD ......................................................
PAGE 6
List of Figures ® Intel Server Chassis P4000S Family TPS List of Figures Figure 1. Internal Chassis View of Intel® Server Chassis P4304XXSFCN ................................... 3 Figure 2. Internal Chassis View of Intel® Server Chassis P4304XXSHCN................................... 4 Figure 3. Internal Chassis View of Intel® Server Chassis P4304XXSFEN ................................... 5 Figure 4. Internal Chassis View of Intel® Server Chassis P4304XXSHEN ................................... 6 Figure 5.
PAGE 7
® Intel Server Chassis P4000S Family TPS List of Figures Figure 38. Chassis System Fans Default location in Intel® Server Chassis P4304XXSFEN ...... 71 Figure 39. Chassis System Fans to support full length card in Intel® Server Chassis P4304XXSFEN ................................................................................................................... 71 Figure 40. Front Panel overview ............................................................................................... 73 Figure 41.
PAGE 8
List of Tables ® Intel Server Chassis P4000S Family TPS List of Tables Table 1. Intel® Server Chassis P4000S family Features .............................................................. 1 Table 2. 365W Power Supply Cable Lengths ............................................................................ 18 Table 3. P1 Main Power Connector........................................................................................... 18 Table 4. P2 Processor#1 Power Connector ...............................
PAGE 9
® Intel Server Chassis P4000S Family TPS List of Tables Table 39. Loading Conditions.................................................................................................... 37 Table 40. Voltage Regulation Limits .......................................................................................... 37 Table 41. Transient Load Requirements ................................................................................... 38 Table 42. Capacitive Loading Conditions ..........................
PAGE 10
List of Tables ® Intel Server Chassis P4000S Family TPS Table 80. Remote Sense Requirements.................................................................................... 63 Table 81. 12V Rail Distribution .................................................................................................. 64 Table 82. Hard Drive 12V rail configuration options .................................................................. 64 Table 83. DC/DC Converters Load Ratings...................................
PAGE 11
® Intel Server Chassis P4000S Family TPS List of Tables Table 119. Declared Acoustic Data of Intel® Server Chassis P4000S family with Intel® Server Board S1200BTS................................................................................................................ 96 Table 120. Test Conditions at Acoustic Lab .............................................................................. 96 Table 121. System Configurations .........................................................................
PAGE 12
List of Tables ® Intel Server Chassis P4000S Family TPS xii Intel order number G22850-006 Revision 1.
PAGE 13
® Intel Server Chassis P4000S Family TPS 1. Product Overview Product Overview The Intel® Server Chassis P4000S family is a 4U pedestal, 22” length server chassis. Intel® Server Chassis P4304XXSFCN and P4304XXSHCN are designed to support Intel® Server Board S1200BTL, and S1200BTS. Intel® Server Chassis P4304XXSFEN, P4304XXSFDR, P4304XXSHEN and P4304XXSHDR are designed to support Intel® Server Board S2400SC. This chapter provides a high-level overview of the chassis features.
PAGE 14
® Product Overview Intel Server Chassis P4000S Family TPS Configuration Peripherals Bays P4304XXSFCN P4304XXSHCN P4304XXSFEN Three (3) half height 5-1/4" bays for optical devices. Drive Bays Includes one fixed drive bay. Supports up to four fixed hard drives. Expansion Slots Up to six PCI cards (depends on board features).
PAGE 15
® Intel Server Chassis P4000S Family TPS 1.2 Product Overview Intel® Server Chassis P4304XXSFCN Views A. B. C. D. E. F. G. H. I. J. K. L. M. 365W Fixed Power supply I/O Ports Alternate RMM4 Knockout PCI Add-in Board Slot Covers AC Input Power Connector Serial Port Knockout A Kensington* Cable Lock Mounting Hole Padlock Loop Alternate RMM4 Knockout Front Control Panel Alternate 5.25” Peripheral Bays 92x38mm System Rear Fan Fixed Hard Drive Bays ® Figure 1.
PAGE 16
® Product Overview 1.3 Intel Server Chassis P4000S Family TPS Intel® Server Chassis P4304XXSHCN Views A. B. C. D. E. F. G. H. I. J. K. L. M. 365W Fixed Power Supply I/O Ports Alternate RMM4 Knockout PCI Add-in Board Slot Covers AC Input Power Connector Serial Port Knockout A Kensington* Cable Lock Mounting Hole Padlock Loop Alternate RMM4 Knockout Front Control Panel 5.25” Peripheral Bays 92x38mm System Rear Fan 4x3.5” Hot-swap HDD Cage ® Figure 2.
PAGE 17
® Intel Server Chassis P4000S Family TPS 1.4 Product Overview Intel® Server Chassis P4304XXSFEN Views A. B. C. D. E. F. G. H. I. J. K. L. M. N. 550W Fixed Power supply I/O Ports Alternate RMM4 Knockout PCI Add-in Board Slot Covers AC Input Power Connector Serial Port Knockout A Kensington* Cable Lock Mounting Hole Padlock Loop Alternate RMM4 Knockout Front Control Panel Alternate 5.25” Peripheral Bays CPU Zone System Fan Fixed Hard Drive Bays PCI Zone System Fan ® Figure 3.
PAGE 18
® Product Overview 1.5 Intel Server Chassis P4000S Family TPS Intel® Server Chassis P4304XXSHEN Views A. B. C. D. E. F. G. H. I. J. K. L. M. N. O. 550W Fixed Power supply I/O Ports Alternate RMM4 Knockout PCI Add-in Board Slot Covers AC Input Power Connector Serial Port Knockout A Kensington* Cable Lock Mounting Hole Padlock Loop Alternate RMM4 Knockout Front Control Panel Alternate 5.25” Peripheral Bays CPU Zone System Fan 4x3.
PAGE 19
® Intel Server Chassis P4000S Family TPS 1.6 Product Overview Intel® Server Chassis P4304XXSFDR Views A. B. C. D. E. F. G. H. I. J. K. L. M. N. 460W Redundant Power Supply (Two) AC Input Power Connector (Two) I/O Ports Alternate RMM4 Knockout PCI Add-in Board Slot Covers Serial Port Knockout A Kensington* Cable Lock Mounting Hole Padlock Loop Alternate RMM4 Knockout Front Control Panel Alternate 5.25” Peripheral Bays CPU Zone System Fan Fixed Hard Drive Bays PCI Zone System Fan ® Figure 5.
PAGE 20
® Product Overview 1.7 Intel Server Chassis P4000S Family TPS Intel® Server Chassis P4304XXSHDR Views A. B. C. D. E. F. G. H. I. J. K. L. M. N. O. 460W Redundant Power Supply (Two) AC Input Power Connector (Two) I/O Ports Alternate RMM4 Knockout PCI Add-in Board Slot Covers Serial Port Knockout A Kensington* Cable Lock Mounting Hole Padlock Loop Alternate RMM4 Knockout Front Control Panel Alternate 5.25” Peripheral Bays CPU Zone System Fan 4x3.
PAGE 21
® Intel Server Chassis P4000S Family TPS  Product Overview In hot-swap hard drives configuration, a door lock is provided on the front bezel assembly with the door to prevent access to the hot-swap hard drives and the interior of the chassis. Note: See the technical product specification appropriate to the server board for a description of BIOS and management security features for each specific supported platform. Technical product specifications can be found at http://www.intel.com/p/en_US/support.
PAGE 22
® Product Overview Intel Server Chassis P4000S Family TPS 2. Front bezel assembly with the door for hot-swap hard drives configuration. A. Security Lock Figure 9. Front Closed Chassis View with Front Bezel for Hot-swap Hard Drives Configuration Both two pedestal front bezel are constructed of molded plastic and attaches to the front of the chassis with three clips on the right side and two snaps on the left.
PAGE 23
® Intel Server Chassis P4000S Family TPS Product Overview 1.11 Front Panel Overview The following figure shows the layout of the Front Control Panel of Intel® Server Chassis P4000S: Figure 10. Front Panel Controls and Indicators 1.
PAGE 24
® Product Overview A B C D E F Intel Server Chassis P4000S Family TPS Hot-swap Power Supply Power Connector Power Connector Hot-swap Power Supply IO Connectors RMM4 NIC Port (Optional) G H I J K Add in PCI-e cards Serial-B Port (Optional) Kensington* Cable Lock Mounting Hole Padlock Loop RMM4 NIC Port (Optional) Figure 12. Back Panel Layout (with Hot-swap Power Supply) 1.13 Standard Fixed Drive Trays Intel® Server Chassis P4000S family supports four 3.5” fixed Hard Disk Drive trays.
PAGE 25
® Intel Server Chassis P4000S Family TPS 1.14 Product Overview 4x3.5” Hot-Swap Hard Disk Drive Cage The Intel® Server Chassis P4000S family supports 4x3.5” hot-swap hard drive cage, which can support up to four hot-swap hard drives. Figure 14. 4x3.5” Hot-Swap Hard Disk Drive Cage 1.14.1 3.5” Hot-swap Hard Drive Carrier Each hard drive must be mounted to a hot-swap drive carrier, making insertion and extraction of the drive from the chassis very simple.
PAGE 26
® Product Overview 1.15 Intel Server Chassis P4000S Family TPS Peripheral Bays Three 5.25-in half-height drive bays are available for CD/DVD-ROM or tape drives as well as one 3.5-inch removable media drive bay. Drive installation is tool-less and requires no screws. Figure 16. Tool-less Rails Mounting 5.25-inch CD-ROM Drive 14 Intel order number G22850-006 Revision 1.
PAGE 27
® Intel Server Chassis P4000S Family TPS 2. Chassis Power Sub-system Chassis Power Sub-system 2.1 365W Power Supply This 365W power supply specification defines a non-redundant power supply that supports pedestal entry server systems. The 365W power supply has 6 outputs; 3.3V, 5V, 12V1, 12V2, -12V, and 5Vsb. The power supply has an AC input and be power factor corrected. 2.1.1 Mechanical Overview The power supply size is 98mm x 150mm x 160mm (H x W x D) and has a wire harness for the DC outputs.
PAGE 28
Chassis Power Sub-system ® Intel Server Chassis P4000S Family TPS Figure 17. Mechanical Drawing for 365W Power Supply Enclosure 16 Intel order number G22850-006 Revision 1.
PAGE 29
® Intel Server Chassis P4000S Family TPS 2.1.2 Chassis Power Sub-system 365W Power Supply Output Wire Harness Listed or recognized component appliance wiring material (AVLV2), CN, rated min 85°C, 300VDC shall be used for all output wiring. Figure 18. Output Cable Harness for 365W Power Supply Revision 1.
PAGE 30
® Chassis Power Sub-system Intel Server Chassis P4000S Family TPS Table 2.
PAGE 31
® Intel Server Chassis P4000S Family TPS 2.1.2.2   Chassis Power Sub-system Processor/Memory Power Connector (P2) Connector housing: 8- Pin Molex* 39-01-2085 (94V2) or equivalent Contact: Molex*, Mini-Fit Jr, HCS, 44476-1111 or equivalent Table 4. P2 Processor#1 Power Connector PIN SIGNAL 18 AWG COLOR PIN SIGNAL 18 AWG COLOR 1 COM Black 5 +12V1 Yellow 2 COM Black 6 +12V1 Yellow 3 COM Black 7 +12V1 Yellow 4 COM Black 8 +12V1 Yellow 2.1.2.
PAGE 32
® Chassis Power Sub-system 2.1.4 Intel Server Chassis P4000S Family TPS AC Input Requirements 2.1.4.1 Power Factor The power supply meets the power factor requirements stated in the Energy Star® Program Requirements for Computer Servers. These requirements are stated below: Table 8. Power Factor Requirements for Computer Servers Output power 20% load 50% load 100% load Power factor 0.8 0.9 0.95 Tested at 230Vac, 50Hz and 60Hz and 115VAC, 60Hz.
PAGE 33
® Intel Server Chassis P4000S Family TPS 2.1.4.5 Chassis Power Sub-system AC Line Fuse The power supply has one line fused in the single line fuse on the line (Hot) wire of the AC input. The line fusing is acceptable for all safety agency requirements. The input fuse is a slow blow type. AC inrush current does not cause the AC line fuse to blow under any conditions. All protection circuits in the power supply do not cause the AC fuse to blow unless a component in the power supply has failed.
PAGE 34
® Chassis Power Sub-system Intel Server Chassis P4000S Family TPS Table 13. Silver Efficiency Requirement Loading Minimum Efficiency 100% of maximum 85% 50% of maximum 20% of maximum 88% 85% The power supply passes with enough margins to make sure in production all power supplies meet these efficiency requirements. 2.1.5.1 Standby Efficiency When in standby mode; the power supply draws less than 1W AC power with 100mA of 5Vstandby load. This shall be tested at 115VAC/60Hz and 230VAC/50Hz. 2.1.
PAGE 35
® Intel Server Chassis P4000S Family TPS 2.1.6.3 Chassis Power Sub-system Standby Output The 5VSB output is present when an AC input greater than the power supply turn on voltage is applied. 2.1.6.4 Voltage Regulation The power supply output voltages stay within the following voltage limits when operating at steady state and dynamic loading conditions. These limits include the peak-peak ripple/noise. These shall be measured at the output connectors. Table 16. Voltage Regulation Limits PARAMETER +3.
PAGE 36
® Chassis Power Sub-system Intel Server Chassis P4000S Family TPS Output 2.1.6.7 MIN MAX Units -12V 1 350 F +5VSB 20 350 F Grounding The output ground of the pins of the power supply provides the output power return path. The output connector ground pins are connected to the safety ground (power supply enclosure). This grounding is well designed to ensure passing the maximum allowed Common Mode Noise levels. The power supply is provided with a reliable protective earth ground.
PAGE 37
® Intel Server Chassis P4000S Family TPS Chassis Power Sub-system The test set-up shall be as shown below: VOUT AC HOT POWER SUPPLY V RETURN AC NEUTRAL LOAD MUST BE ISOLATED FROM THE GROUND OF THE POWER SUPPLY LOAD 10uF .1uF AC GROUND GENERAL NOTES: 1. LOAD THE OUTPUT WITH ITS MINIMUM LOAD CURRENT. 2. CONNECT THE PROBES AS SHOWN. 3. REPEAT THE MEASUREMENTS WITH THE MAXIMUM LOAD ON THE OUTPUT. SCOPE SCOPE NOTE: USE A TEKTRONIX 7834 OSCILLOSCOPE WITH 7A13 AND DIFFERENTIAL PROBE P6055 OR EQUIVALENT.
PAGE 38
® Chassis Power Sub-system Intel Server Chassis P4000S Family TPS Vout 10% Vout V1 V2 V3 V4 Tvout_off Tvout_rise Tvout_on Figure 20. Output Voltage Timing Table 21. Turn On/Off Timing Item Tsb_on_delay T ac_on_delay Tvout_holdup Tpwok_holdup Tpson_on_delay T pson_pwok Tpwok_on T pwok_off Tpwok_low Tsb_vout 26 Description Delay from AC being applied to 5VSB being within regulation. Delay from AC being applied to all output voltages being within regulation.
PAGE 39
® Intel Server Chassis P4000S Family TPS T5VSB_holdup Time the 5VSB output voltage stays within regulation after loss of AC. Chassis Power Sub-system 70 ms Figure 21. Turn On/Off Timing (Power Supply Signals) 2.1.7 Protection Circuits Protection circuits inside the power supply causes only the power supply’s main outputs to shutdown.
PAGE 40
® Chassis Power Sub-system Intel Server Chassis P4000S Family TPS Table 22. Over Voltage Protection (OVP) Limits 2.1.7.3 Output Voltage +3.3V 4.5 MAX (V) +5V 6.5 +12V1,2 14.5 +5VSB 6.5 Over Temperature Protection (OTP) The power supply will be protected against over temperature conditions caused by loss of fan cooling or excessive ambient temperature. In an OTP condition the PSU will shutdown. 2.1.
PAGE 41
® Intel Server Chassis P4000S Family TPS Disabled Chassis Power Sub-system 0.3V ≤ Hysteresis ≤ 1.0V In 1.0-2.0V input voltages range is required  1.0 V PS is enable d  2.0 V PS is disable d Enabled 0V 2.0 V 1.0 V 5.25V Figure 22. PSON# Required Signal Characteristic 2.1.8.2 PWOK (Power OK) Output Signal PWOK is a power OK signal and will be pulled HIGH by the power supply to indicate that all the outputs are within the regulation limits of the power supply.
PAGE 42
® Chassis Power Sub-system 2.2.1 Intel Server Chassis P4000S Family TPS Mechanical Overview The power supply size is 98mm x 150mm x 160mm (H x W x D) and has a wire harness for the DC outputs. The AC plugs directly into the external face of the power supply. Figure 23. Mechanical Drawing for 550W Power Supply Enclosure 30 Intel order number G22850-006 Revision 1.
PAGE 43
® Intel Server Chassis P4000S Family TPS 2.2.1.1 Chassis Power Sub-system 550W Power Supply Output Wire Harness Listed or recognized component appliance wiring material (AVLV2), CN, rated min 85°C shall be used for all output wiring. Figure 24. Output Cable Harness for 550W Power Supply Revision 1.
PAGE 44
® Chassis Power Sub-system Intel Server Chassis P4000S Family TPS Table 25. Power Supply Cable Lengths From Power Supply cover exit hole 280 To connector # P1 24 Description Baseboard Power Connector Power Supply cover exit hole 300 P2 8 Processor 0 connector Power Supply cover exit hole 500 P3 8 Processor 1 connector Power Supply cover exit hole 500 5 SATA Peripheral Power Connector for 5.25" Extension from P4 100 5 SATA Peripheral Power Connector for 5.
PAGE 45
® Intel Server Chassis P4000S Family TPS 2.2.1.1.2 Chassis Power Sub-system Processor/Memory Power Connector (P2)  Connector housing: 8- Pin Molex* 39-01-2085 (94V2) or equivalent  Contact: Molex*, Mini-Fit Jr, HCS, 44476-1111 or equivalent Table 27. P2 Processor#1 Power Connector Pin Signal 18 awg color Pin Signal 18 awg color 1 COM Black 5 +12V1 Yellow 2 COM Black 6 +12V1 Yellow 3 COM Black 7 +12V1 Yellow 4 COM Black 8 +12V1 Yellow 2.2.1.1.
PAGE 46
® Chassis Power Sub-system Intel Server Chassis P4000S Family TPS Pin 2.2.2 Signal 18 AWG Color 4 COM Black 5 +12V3 Yellow/Black Temperature Requirements The power supply shall operate within all specified limits over the Top temperature range. Table 31. Thermal Requirements Item Description Min Max Top Operating temperature range. 0 Tnon-op Non-operating temperature range. - Units 5 0 º 7 º 4 0 Altitude Maximum operating altitude. 0 3 2.2.3.
PAGE 47
® Intel Server Chassis P4000S Family TPS Chassis Power Sub-system Table 33. AC Input Voltage Range Parameter Min Rated Vmax Voltage (110) 90 Vrms 100-127 Vrms 140 Vrms 200-240 Vrms 50/60 264 Vrms 63 Hz Voltage (220) Frequency 180 Vrms 47 Hz Start up vac 85VAC +/4VAC Power off vac 70VAC +/5VAC Notes: 1. 2. 3. Maximum input current at low input voltage range shall be measured at 90VAC, at max. load. Maximum input current at high input voltage range shall be measured at 180VAC, at max. load.
PAGE 48
® Chassis Power Sub-system Intel Server Chassis P4000S Family TPS Table 35. AC Line Sag Transient Performance Duration 0 to ½ AC cycle Sag 95% > 1 AC cycle >30 % AC Line Sag (10sec interval between each sagging) Operating AC Voltage Line Frequency Performance Criteria Nominal AC Voltage ranges 50/60Hz No loss of function or performance Nominal AC Voltage ranges 50/60Hz Loss of function acceptable, self recoverable Table 36.
PAGE 49
® Intel Server Chassis P4000S Family TPS Chassis Power Sub-system Table 38. Over Voltage Protection Limits Parameter Notes: 1. 2. 3. 4. 2.2.5.2 Min Max. Peak Unit 3.3V 0.5 18.0 A 5V 0.3 15.0 12V1 0.7 24.0 28.0 A 12V2 0.7 24.0 28.0 A 12V3 1.5 18.0  12V 0.0 0.5 5Vstby 0.0 3.0 A A 3.5 A Max. combined power for all output shall not exceed 550W. Peak combined power for all outputs shall not exceed 630W for 20 seconds. Max.
PAGE 50
® Chassis Power Sub-system Parameter +12V2 +12V3 - 12V +5VSB 2.2.5.5 Intel Server Chassis P4000S Family TPS Tolerance - 4%/+5% - 4%/+5% - 10%/+10% - 4%/+5% Min +11.52 +11.52 - 13.20 +4.80 Nom +12.00 +12.00 -12.00 +5.00 Max +12.60 +12.60 -10.80 +5.25 Units Vrms Vrms Vrms Vrms Dynamic Loading The output voltages remain within limits specified for the step loading and capacitive loading specified in the table below.
PAGE 51
® Intel Server Chassis P4000S Family TPS 2.2.5.8 Chassis Power Sub-system Residual Voltage Immunity in Standby mode The power supply is immune to any residual voltage placed on its outputs (Typically a leakage voltage through the system from standby output) up to 500mV. There is neither additional heat generated, nor stressing of any internal components with this voltage applied to any individual or all outputs simultaneously. It also does not trip the protection circuits during turn on.
PAGE 52
® Chassis Power Sub-system Intel Server Chassis P4000S Family TPS approximately at the same time. All outputs rise monotonically. Each output voltage reach regulation within 50ms (Tvout_on) of each other during turn on the power supply. Each output voltage fall out of regulation within 400ms (Tvout_off) of each other during turn off. Table 45 shows the timing requirements for the power supply being turned on and off by the AC input, with PSON held low and the PSON signal, with the AC input applied.
PAGE 53
® Intel Server Chassis P4000S Family TPS Item Tvout_holdup Description Time all output voltages stay within regulation after loss of AC. Tested at 75% of maximum load. Chassis Power Sub-system MIN UNITS ms 13 Tpwok_holdup Delay from loss of AC to de-assertion of PWOK. Tested at 75% of maximum load. 12 Tpson_on_delay Delay from PSON# active to output voltages within regulation limits. 5 T pson_pwok Delay from PSON# deactivate to PWOK being de-asserted.
PAGE 54
® Chassis Power Sub-system 2.2.6.1 Intel Server Chassis P4000S Family TPS Current Limit (OCP) Below are over current protection limits for each output. If the current limits exceed, the power supply shuts down and latches-off. The latch will be cleared by toggling the PSON# signal or by an AC power interruption. The power supply is not damaged from repeated power cycling in this condition.
PAGE 55
® Intel Server Chassis P4000S Family TPS Chassis Power Sub-system signal is pulled to a standby voltage by a pull-up resistor internal to the power supply. Refer to Figure 27 for the timing diagram. Table 47. PSON# Signal Characteristic Signal Type PSON# = Low Accepts an open collector/drain input from the system. Pull-up to VSB located in power supply. ON PSON# = High or Open OFF MIN MAX Logic level low (power supply ON) 0V 1.0V Logic level high (power supply OFF) 2.0V 5.
PAGE 56
® Chassis Power Sub-system Intel Server Chassis P4000S Family TPS Signal Type Open collector/drain output from power supply. Pull-up to VSB located in system. 4mA Sink current, PWOK = low Source current, PWOK = high 2mA PWOK delay: Tpwok_on 100ms 500ms PWOK rise and fall time 100sec Power down delay: T pwok_off 2.3 1ms 460W Power Supply This specification defines a 460W redundant power supply that supports server systems.
PAGE 57
® Intel Server Chassis P4000S Family TPS Pin Chassis Power Sub-system Name Pin Name A1 GND B1 GND A2 GND B2 GND A3 GND B3 GND A4 GND B4 GND A5 GND B5 GND A6 GND B6 GND A7 GND B7 GND A8 GND B8 GND A9 GND B9 GND A10 +12V B10 +12V A11 +12V B11 +12V A12 +12V B12 +12V A13 +12V B13 +12V A14 +12V B14 +12V A15 +12V B15 +12V A16 +12V B16 +12V A17 +12V B17 +12V A18 +12V B18 +12V A19 PMBus* SDA B19 A0 (SMBus* address) A20 PMBus* SCL B
PAGE 58
® Chassis Power Sub-system Intel Server Chassis P4000S Family TPS Table 50. LED Characteristics Min λd Wavelength Green Amber 562 607 Nominal λd Wavelength Max λd Wavelength 565 610 Units nm nm 568 613 Table 51. LED Indicator States Power Supply Condition Output ON and OK. No AC power to all power supplies. AC present/Only 12VSB on (PS off) or PS in Cold redundant state. AC cord unplugged or AC power lost; with a second power supply in parallel still with AC input power.
PAGE 59
® Intel Server Chassis P4000S Family TPS 2.3.2 Chassis Power Sub-system AC Input Requirements 2.3.2.1 Power Factor The power supply must meet the power factor requirements stated in the Energy Star® Program Requirements for Computer Servers. These requirements are stated below: Output power Power factor 10% load > 0.65 20% load > 0.80 50% load > 0.90 100% load > 0.
PAGE 60
® Chassis Power Sub-system 2.3.2.5 Intel Server Chassis P4000S Family TPS AC Line 12VSBHoldup The 12VSB output voltage should stay in regulation under its full load (static or dynamic) during an AC dropout of 70ms min (=12VSB holdup time) whether the power supply is in ON or OFF state (PSON asserted or de-asserted). 2.3.2.6 AC Line Fuse The power supply shall have one line fused in the single line fuse on the line (Hot) wire of the AC input.
PAGE 61
® Intel Server Chassis P4000S Family TPS Loading Minimum Efficiency 100% of maximum 88% Chassis Power Sub-system 50% of maximum 92% 20% of maximum 88% 10% of maximum 80% The power supply must pass with enough margins to make sure in production all power supplies meet these efficiency requirements. 2.3.4 DC Output Specification 2.3.4.1 Output Power/Currents The following table defines the minimum power and current ratings.
PAGE 62
® Chassis Power Sub-system Output Intel Server Chassis P4000S Family TPS  Step Load Size(See note) +12VSB 1.0A +12V 60% of max load Note: For dynamic condition +12V min loading is 1A. 2.3.4.5 Load Slew Rate Test capacitive Load 0.25 A/sec 0.25 A/sec 20 F 2000 F Capacitive Loading The power supply shall be stable and meet all requirements with the following capacitive loading ranges. Table 60. Capacitive Loading Conditions Output +12VSB +12V 2.3.4.
PAGE 63
® Intel Server Chassis P4000S Family TPS Chassis Power Sub-system latching mechanism to prevent insertion and extraction of the power supply when the AC power cord is inserted into the power supply. 2.3.4.10 Forced Load Sharing The +12V output will have active load sharing. The output will share within 10% at full load. The failure of a power supply should not affect the load sharing or output voltages of the other supplies still operating.
PAGE 64
® Chassis Power Sub-system Intel Server Chassis P4000S Family TPS Table 62. Timing Requirements Item Tvout_rise Tsb_on_delay Tac_on_delay Tvout_holdup Tpwok_holdup Tpson_on_delay Tpson_pwok Tpwok_on T pwok_off Tpwok_low Tsb_vout T12VSB_holdup Description Output voltage rise time Delay from AC being applied to 12VSBbeing within regulation. Delay from AC being applied to all output voltages being within regulation. Time 12V output voltage stays within regulation after loss of AC at 70% load.
PAGE 65
® Intel Server Chassis P4000S Family TPS Chassis Power Sub-system Figure 31. Turn On/Off Timing (Power Supply Signals) 2.3.5 Protection Circuits Protection circuits inside the power supply shall cause only the power supply’s main outputs to shut down. If the power supply latches-off due to a protection circuit tripping, an AC cycle OFF for 15sec and a PSON# cycle HIGH for 1sec shall be able to reset the power supply. 2.3.5.
PAGE 66
® Chassis Power Sub-system 2.3.5.2 Intel Server Chassis P4000S Family TPS Over Voltage Protection (OVP) The power supply over voltage protection shall be locally sensed. The power supply shall shutdown and latces-off after an over voltage condition occurs. This latch shall be cleared by toggling the PSON# signal or by an AC power interruption. The values are measured at the output of the power supply’s connectors.
PAGE 67
® Intel Server Chassis P4000S Family TPS Disabled Chassis Power Sub-system 0.3V ≤ Hysteresis ≤ 1.0V In 1.0-2.0V input voltages range is required  1.0 V PS is enabled  2.0 V PS is disabled Enabled 0V 1.0V 2.0V 3.46V Figure 32. PSON# Required Signal Characteristic 2.3.6.2 PWOK (Power OK) Output Signal PWOK is a power OK signal and will be pulled HIGH by the power supply to indicate that all the outputs are within the regulation limits of the power supply.
PAGE 68
® Chassis Power Sub-system Intel Server Chassis P4000S Family TPS Q1 3.3VSB R2 20 2N4401 12V PWOK out R1 10k Q2 2N4401 R3 10k PWOK in R4 820 Figure 33. Implementation of the Power Ok Circuits 2.3.6.3 SMBAlert# Signal This signal indicates that the power supply is experiencing a problem that the user should investigate. This shall be asserted due to Critical events or Warning events.
PAGE 69
® Intel Server Chassis P4000S Family TPS Chassis Power Sub-system Refer to Intel® Common Hardware and Firmware Requirements for CRPS Power Supplier for detailed requirements. 2.3.9 Firmware Uploader The power supply shall have the capability to update its firmware from the PMBus* interface while it is in standby mode. This FW can be updated when in the system and in standby mode and outside the system with power applied to the 12Vstby pins.
PAGE 70
® Chassis Power Sub-system 2.4.1 Intel Server Chassis P4000S Family TPS Mechanical Overview Figure 34. Outline Drawing 58 Intel order number G22850-006 Revision 1.
PAGE 71
® Intel Server Chassis P4000S Family TPS 2.4.1.1 Chassis Power Sub-system Airflow Requirements The power distribution board shall get enough airflow for cooling DC/DC converters from the fans located in the Power Supply modules. Following is a basic drawing showing airflow direction. The amount of cooling airflow that will be available to the DC/DC converters is to be no less than 1.2M/s. Airflow direction PDB Rear power supply Front power supply Figure 35. Airflow Diagram 2.4.1.
PAGE 72
® Chassis Power Sub-system Intel Server Chassis P4000S Family TPS Table 69. Input Connector and Pin Assignment Diagrams Pin A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 A22 A23 A24 A25 2.4.2.
PAGE 73
® Intel Server Chassis P4000S Family TPS Chassis Power Sub-system From Length, mm To connector # No. of pins Extension from P10 75 P11 4 1x4 legacy HSBP Power/Fixed HDD adaptor Connection P12 4 2x2 Legacy PCI Power Connector for PCIe slots Connector only (no cable) 2.4.2.2.1 Description Baseboard power connector (P1)  Connector housing: 24-Pin Molex* Mini-Fit Jr. 39-01-2245 or equivalent  Contact: Molex* Mini-Fit, HCS Plus, Female, Crimp 44476 or equivalent Table 71.
PAGE 74
® Chassis Power Sub-system Pin Intel Server Chassis P4000S Family TPS 1 Signal COM 18 AWG color Black 5 +12V1 Yellow 2 COM Black 6 +12V1 Yellow 3 COM Black 7 +12V1 Yellow 4 COM Black 8 +12V1 Yellow 2.4.2.2.4 Pin Signal 18 AWG Color Power Signal Connector (P4)  Connector housing: 5-pin Molex* 50-57-9405 or equivalent  Contacts: Molex* 16-02-0087 or equivalent Table 74. Power Signal Connector 2.4.2.2.
PAGE 75
® Intel Server Chassis P4000S Family TPS 2.4.2.2.7 Chassis Power Sub-system SATA 1x5 Peripheral Power Connectors (P5, P6)  Connector housing: Molex* 0675-82-0000 or equivalent;  Contact: Molex* 0675-81-0000 or equivalent Table 78. SATA Peripheral Power Connectors 2.4.2.3 Pin 1 Signal +3.3VDC 18 AWG Color Orange 2 COM Black 3 +5VDC Red 4 COM Black 5 +12V2 Brown Grounding The ground of the pins of the PDB output connectors provides the power return path.
PAGE 76
® Chassis Power Sub-system 2.4.2.5 Intel Server Chassis P4000S Family TPS 12V Rail Distribution The following table shows the configuration of the 12V rails and what connectors and components in the system they are powering. Table 81. 12V Rail Distribution P2 P3 P12 P1 P8 2x4 2x2 2x12 1x4 1x4 1x4 1x4 CPU1 Memory1 CPU2 Memory2 PCIe Fans 17.8 12V1 A 10.5 A 17.8 10.5 21.7 10.0 A 12V2 12V3 P9 P10 P11 P5,6,7 (2) 1x5, 1x4 Misc HDD and peripherals 3.0 A 18.
PAGE 77
® Intel Server Chassis P4000S Family TPS 2.4.2.7 Chassis Power Sub-system DC/DC Converters Loading The following table defines power and current ratings of three DC/DC converters located on the PDB, each powered from +12V rail. The 3 converters meet both static and dynamic voltage regulation requirements for the minimum and maximum loading conditions. Table 83. DC/DC Converters Load Ratings MAX Load +3.
PAGE 78
® Chassis Power Sub-system Intel Server Chassis P4000S Family TPS Table 86. Transient Load Requirements + 3.3VDC Output 5A Max Load Slew Rate 0.25 A/s Test capacitive Load 250 F + 5VDC 5A 0.25 A/s 400 F +5Vsb 0.5A 0.25A/s 20 F 2.4.2.11 Max  Step Load Size DC/DC Converter Capacitive Loading The DC/DC converters are stable and meet all requirements with the following capacitive loading ranges. Min capacitive loading applies to static load only. Table 87.
PAGE 79
® Intel Server Chassis P4000S Family TPS Chassis Power Sub-system The test set-up is shown below: VOUT AC HOT POWER SUPPLY V RETURN AC NEUTRAL LOAD MUST BE ISOLATED FROM THE GROUND OF THE POWER SUPPLY LOAD 10uF .1uF AC GROUND GENERAL NOTES: 1. LOAD THE OUTPUT WITH ITS MINIMUM LOAD CURRENT. 2. CONNECT THE PROBES AS SHOWN. 3. REPEAT THE MEASUREMENTS WITH THE MAXIMUM LOAD ON THE OUTPUT. SCOPE SCOPE NOTE: USE A TEKTRONIX 7834 OSCILLOSCOPE WITH 7A13 AND DIFFERENTIAL PROBE P6055 OR EQUIVALENT.
PAGE 80
® Chassis Power Sub-system 2.4.3 Intel Server Chassis P4000S Family TPS Protection Circuits The PDB shall shut down all the DC/DC converters on the PDB and the power supply (from PSON) if there is a fault condition on the PDB (OVP or OCP). If the PDB DC/DC converter latches-off due to a protection circuit tripping, an AC cycle OFF for 15sec min or a PSON# cycle HIGH for 1sec shall be able to reset the power supply and the PDB. 2.4.3.
PAGE 81
® Intel Server Chassis P4000S Family TPS 2.4.4.1 Chassis Power Sub-system System PWOK requirements The system will connect the PWOK signal to 3.3V or 5V from a pull-up resistor. The maximum sink current of the power supplies are 0.5mA. The minimum resistance of the pull-up resistor is stated below depending upon the motherboard’s pull-up voltage. Refer to the CRPS Power Supply Specification for signal details. Table 92. System PWOK Requirements Motherboard pull-up voltage 2.4.
PAGE 82
Chassis Cooling 3. ® Intel Server Chassis P4000S Family TPS Chassis Cooling The Intel® Server Chassis P4000S family is engineered to provide sufficient cooling for all internal components of the server. The cooling subsystem is dependent upon proper airflow. The designated cooling vents on both the front and back of the chassis must be left open and must not be blocked by improperly installed devices.
PAGE 83
® Intel Server Chassis P4000S Family TPS 3.2 Chassis Cooling Cooling solution for Intel® Server Board S2400SC and S1400FP Two 92 x 32 mm fans provide cooling for the processors, memory, hard drives and add-in cards. The two fans draw air through the rear of each hard drive bay to provide drive, processors, and memory cooling. All system fans provide a signal for RPM detection the server board can make available for server management functions.
PAGE 84
® Chassis Cooling Intel Server Chassis P4000S Family TPS The Air duct for Intel® Server Board S2400SC and S1400FP must be installed to keep the system operating within supported maximum thermal limits. Refer to the baseboard documentation for additional details on thermal and configuration requirements. 3.
PAGE 85
® Intel Server Chassis P4000S Family TPS 4. Standard Front Panel Standard Front Panel 4.1 Front Panel Overview The Front Panel will be used for Intel® Server Board S1200BTL, S1200BTS and other platforms. It is a common front panel across different server boards and systems. Figure 40. Front Panel overview This front panel conforms to SSI Specification with one exception that up to 4 LAN act/link LEDs are supported.
PAGE 86
® Standard Front Panel 4.3 Intel Server Chassis P4000S Family TPS Common Front Panel Placement A Description Unstuffable ID Button with ID LED F Status/Fault LED Description B NMI Button G Power Button with power LED C LAN1 LED H LAN2 LED D LAN3 LED I LAN4 LED E Reset Button J HDD activity LED Figure 41. Common Front Panel LED/Button Arragement 4.3.1 Common Front Panel LED Functionality Table 94.
PAGE 87
® Intel Server Chassis P4000S Family TPS LED Activity/Link ® (LAN 1-2 for Intel Server Board S1200BT) Chassis Identification Color Green Standard Front Panel Condition Blink What It Means LAN access. Off Idle. Blue On Front panel chassis ID button pressed. Blue Blink Unit selected for identification from the software. Off No identification. Note: This is dependent on server board support. Not all server boards support all features.
PAGE 88
® Standard Front Panel Intel Server Chassis P4000S Family TPS Table 97. Chassis Intrusion Pin-out Pin 1 2 76 Description RA 1x2 Chassis Intrusion Signal Description FP_CHASSIS_INTRU GND Intel order number G22850-006 Revision 1.
PAGE 89
® Intel Server Chassis P4000S Family TPS 4x3.5” Hot-Swap Back Plane (HSBP) 5. 4x3.5” Hot-Swap Back Plane (HSBP) 5.1 Overview The Chassis supports 4x3.5” SAS/SATA backplane. The backplane provides the platform support for up to four hot-swap SAS or SATA hard drives. 5.1.1 Key Features The 4HDD SAS/SATA HSBP supports the following feature set: 1. 4x SAS/SATA 3.5" hot swap hard drive at 6Gb SAS/SATA or slower speeds. 2. One SGPIO SFF-8485 interface from a 5pin connector. 3.
PAGE 90
® 4x3.5” Hot-Swap Back Plane (HSBP) Intel Server Chassis P4000S Family TPS 2 A. I C_In Connectors B. SATA/SAS Cable Connectors C. Power Connectors D. SATA 6X Mode 2 E. I C_Out Connectors F. SGPIO connector G. SATA/SAS Hot-swap Drive Connectors Figure 42. 4x3.5” HSBP Board Layout Note: Secondary side is mirrored. 78 Intel order number G22850-006 Revision 1.
PAGE 91
® 4x3.5” Hot-Swap Back Plane (HSBP) Intel Server Chassis P4000S Family TPS 5.2 4x 3.5" HSBP Functional Description 5.2.1 4x3.5” HSBP Microcontroller The microcontroller Cypress* PSoC (CY8C22545-24AXI) is sized for 4x and 8x HSBP. It includes I2C interface hardware for in application updating of FW operational code from the I2C interface. Following are the microcontroller signal names and pin numbers: Table 98. 4x3.5" HSBP Microcontroller Pinouts Pin Revision 1.
PAGE 92
® 4x3.5” Hot-Swap Back Plane (HSBP) Pin Intel Server Chassis P4000S Family TPS 36 Pin Name P0[2] Signal Name TP_THERM_N 37 P0[4] TP_LED_HDD_FAULT4_N 38 P0[6] TP_LED_HDD_FAULT6_N 39 Vdd P3V3 40 P0[7] TP_LED_HDD_FAULT7_N 41 P0[5] TP_LED_HDD_FAULT5_N 42 P0[3] TP_P0_3 43 P0[1] TP_P0_1 44 P2[7] FM_HDD_PRSNT3 5.2.2 SGPIO Functionality The 4x 3.5" HSBP supports a SFF-8485 compliant SGPIO interface.
PAGE 93
® 4x3.5” Hot-Swap Back Plane (HSBP) Intel Server Chassis P4000S Family TPS HSBP#3 HSBP#2 I2C BUS Addressing: D4h 1x5 I2C OUT Connector HSBP#1 I2C BUS Addressing: D2h 1x5 I2C IN Connector 1x5 I2C OUT Connector I2C BUS Addressing: D0h 1x5 I2C IN Connector 1x5 I2C OUT Connector 1x5 I2C IN Connector HSBP I2C Connector Baseboard 2 Figure 43. 4x 3.5" HSBP I C Connectivity 5.2.4 SATA 6X Mode Jumper Functionality The SATA 6X Mode jumper is used to enable baseboard AHCI SATA ports SGPIO function.
PAGE 94
® 4x3.5” Hot-Swap Back Plane (HSBP) Intel Server Chassis P4000S Family TPS 5.2.5 HSBP LED Functionality Below is a table for EPSD LED functionality for HSBP board. Table 100.
PAGE 95
® 4x3.5” Hot-Swap Back Plane (HSBP) Intel Server Chassis P4000S Family TPS 5.3.1 Pinouts Table 103. 4x3.5” HSBP SGPIO Connector Pinouts Description 1x5pin SATA SGPIO Signal Description SGPIO_CLOCK_0 SGPIO_LOAD_0 GND SGPIO_DATAOUT_0 SGPIO_DATAIN_0 Pin 1 2 3 4 5 2 Table 104. 4x3.5” HSBP I C (In) Connector Pinouts Description 2 1x5Pin I C Connector (In) Signal Description SMB_3V3SB_DAT GND SMB_3V3SB_CLK SMB_ADD0 SMB_ADD1 Pin 1 2 3 4 5 2 Table 105. 4x3.
PAGE 96
4x3.5” Hot-Swap Back Plane (HSBP) 5.4 ® Intel Server Chassis P4000S Family TPS 4x3.5” HSBP Cabling Requirements The 4x 3.5" HSBP requires the following cables: 1. Ganged 4x SATA/SAS data cable. 2. I2C cable - 5pin on HSBP side to 3pin on baseboard side 3. SGPIO cable - 5pin on HSBP side to 5pin on host controller side. 84 Intel order number G22850-006 Revision 1.
PAGE 97
® Intel Server Chassis P4000S Family TPS 6. System Interconnection 6.1 Chassis Internal Cables System Interconnection Note: This chapter provides the chassis internal cables specification descriptions. Different chassis configuration may come with different cable settings. 6.1.1 Front Panel Cable A 24-conductor ribbon cable with 24-pin IDC connectors links the front panel to the SSI EEB Revision 3.61-compliant server board. Figure 44. Chassis Front Panel Cable 6.1.
PAGE 98
® System Interconnection 6.1.3 Intel Server Chassis P4000S Family TPS USB Cable A 10-conductor USB cable with 10-pin connectors at one end and two 4-pin external USB connectors at the other end is used for connecting the front panel- mounted USB connector to the server board. Figure 46. USB Cable Drawing 6.1.4 SATA Power Adapter Cable The SATA Power Adapter Cable has a 4-pin LP4 connector at one end, two 15-pins SATA power connector at the other end.
PAGE 99
® Intel Server Chassis P4000S Family TPS 6.1.5 System Interconnection SATA cable for HDDs/ODD The SATA cables with two 7-pin SATA connectors are used for connecting the SATA HDDs/ODD to the server board. Figure 48. SATA cable for HDDs (450mm) 6.1.6 Mini SAS (MB) to 4pcs 7Pin SATA Cable with SGPIO Cable The cable has a 36-pin connector at one end, four 7-pin SATA connectors and a 5-pin SGPIO connector at the other end. The cable is used for connecting the motherboard Mini SAS connector to 4x3.
PAGE 100
® System Interconnection 6.1.7 Intel Server Chassis P4000S Family TPS Mini SAS (MB) to 4pcs 7Pin SATA Cable The cable has a 36-pin connector at one end, four 7-pin SATA connectors at the other end. The cable is used for connecting the motherboard Mini SAS connector to SATA connectors on fixed HDD. Figure 50. Mini SAS(MB) to 4pcs 7Pin SATA Cable 6.1.8 I2C Cable (5pin (HSBP)--3pin (MB)) The I2C cable is used for enclosure management communication between I/O controller (RAID) and backplane.
PAGE 101
® Intel Server Chassis P4000S Family TPS 6.1.9 System Interconnection SGPIO Cable The SGPIO cable acts as an enclosure management interface between ESB2 and the backplane and is used by SW RAID to provide basic array device status indication from the visual LEDs. Figure 52. SGPIO Cable Revision 1.
PAGE 102
® ® System-Compatible Intel Server Boards 7. Intel Server Chassis P4000S Family TPS System-Compatible Intel® Server Boards The Intel® Server Chassis P4000S family supports the following Intel® server boards: ® Table 107.
PAGE 103
® Intel Server Chassis P4000S Family TPS Reliability, Serviceability, and Availability 8. Reliability, Serviceability, and Availability 8.1 Mean Time between Failure The following is the calculated Mean Time Between Failures (MTBF) at maximum configuration at 40C (ambient air). These values are derived using a historical failure rate and multiplied by factors for application, electrical and/or thermal stress and for device maturity. MTBF estimates should be viewed as “reference numbers” only.
PAGE 104
® Reliability, Serviceability, and Availability Intel Server Chassis P4000S Family TPS Table 109.
PAGE 105
® Intel Server Chassis P4000S Family TPS Reliability, Serviceability, and Availability Table 111. Calculated Mean Time Between Failure – P4304XXSFDN and P4304XXSHDN Intel® Server Chassis P4304XXSFDN Subassembly (Server in 40°C ambient air) 8.
PAGE 106
® Environmental Limits Intel Server Chassis P4000S Family TPS 9. Environmental Limits 9.1 System Office Environment Table 113. System Office Environment Summary Parameter Operating temperature Limits +10°C to +35°C with the maximum rate of change not to exceed 10°C per hour. Non-operating temperature -40°C to +70°C Non-operating humidity 50% to 90%, non-condensing with a maximum wet bulb of 28°C (at temperatures from 25°C to 35°C) Acoustic noise 7.
PAGE 107
® Intel Server Chassis P4000S Family TPS        9.3 Environmental Limits Power Frequency Magnetic Fields Power Line Harmonics Radiated Emissions Radiated Immunity Telecom Power Line Conducted Emissions Voltage Dip and Dropout Reliability Test Intel® Server Chassis P4000S Family Acoustic Level The following tables detail the declared acoustic data for reference. 9.3.1 Intel® Server Chassis P4000S Family with Intel® Server Board S1200BTL 9.3.1.1 Test Conditions at Acoustic Lab Table 114.
PAGE 108
® Environmental Limits 9.3.2 Intel Server Chassis P4000S Family TPS Intel® Server Chassis P4000S Family with Intel® Server Board S1200BTS 9.3.2.1 Test Conditions at Acoustic Lab Table 117. Test Conditions at Acoustic Lab Idle Mode Function Conditions/Stress Software Windows*-2k8R2 Idling Stress Mode_TO1 IO meter + PTU_1.5 (Core 50%) Stress Mode_TO2 IO meter + memBW4 Delay 1 9.3.2.
PAGE 109
® Intel Server Chassis P4000S Family TPS 9.3.3.2 Environmental Limits Test Environment The room temperature shall be 23°C+/-2°C, recommended related humidity is 40% ~70% based on ISO-7779 standard. 9.3.3.3 Declared Acoustic Data Table 121.
PAGE 110
® Environmental Limits 9.3.4.3 Intel Server Chassis P4000S Family TPS Declared Acoustic Data Table 124. System Configurations Chassis Configuration 1 P4304XXSHDR Motherboard S1400FP CPU TDP 95W Memory R/C QRX4 fully populated GPGPU/card 3 PCI Cards HDD 2x3.5” HDDs populated Stress mode Idle Mode/TO ® ® Table 125.
PAGE 111
® Intel Server Chassis P4000S Family TPS Product Regulatory Compliance 10. Product Regulatory Compliance Please refer to the Intel® Server Products Regulatory and Safety document for the product regulatory compliance reference. The document can be downloaded from http://www.intel.com/support/motherboards/server/. Revision 1.
PAGE 112
Appendix A: Integration and Usage Tips ® Intel Server Chassis P4000S Family TPS Appendix A: Integration and Usage Tips This appendix provides a list of useful information that is unique to the Intel® Server Chassis P4000S family and should be kept in mind while integrating and configuring your server. System fans are not hot swappable. The Intel® Local Control Panel can only be used with systems configured with an Intel® Management Module. Make sure the latest system software is loaded on the server.
PAGE 113
® Intel Server Chassis P4000S Family TPS Glossary Glossary Word/Acronym Definition ACA Australian Communication Authority ANSI American National Standards Institute ATA Advanced Technology Attachment ATX Advanced Technology Extended Auto-Ranging Power supply that automatically senses and adjust itself to the proper input voltage range (110 VAC or 220 VAC). No manual switches or manual adjustments are needed.
PAGE 114
® Glossary Intel Server Chassis P4000S Family TPS Word/Acronym Definition OTP Over Temperature Protection Over-current A condition in which a supply attempts to provide more output current than the amount for which it is rated. This commonly occurs if there is a ‘short circuit’ condition in the load attached to the supply.