Intel Rapid Start Technology User Guide

DISKPART>detail disk
DISKPART>select Volume Z
(Z is Volume of your store partition. Refer to results from “detail disk” for exact
volume number)
DISKPART>set id=84 override
(The id must be set to 84)
DISKPART>exit
3.6. Type Exit to close the command line utility.
4.1. Go to Control Panel > System and Security > Administrative Tools > Computer
Management > Disk Management.
4.2. Confirm in Disk Management that there is now a hibernation partition on the SSD with the
correct size specified earlier.
4.3. Close Disk Management and restart the computer for the BIOS to identify the newly created
hibernation partition.
Step 4: Verify the hibernation partition