Download the

5. Open the chassis and remove the BIOS Configuration Jumper. See the Technical Product
Specification for details including the location of this jumper.
Figure 1: Jumper removed Figure 2: Jumper in place
(BIOS Recovery Mode) (Normal Mode)
6. Power the computer on.
7. Wait 2-5 minutes for the update to complete.
8. The computer will either turn off when the recovery process is completed or it will prompt you to turn it
off.
9. Remove the USB device.
10. Replace the BIOS Configuration Jumper (Figure 2 above).
11. Close the chassis.
12. Restart the computer.